Layer-specific mechanical properties of OSB panels using digital image correlation
European Journal of Wood and Wood Products · 2026-12 · 84 (6)
DOI: 10.1007/s00107-026-02518-x ↗Kurz gefasst
Fachartikel in der Zeitschrift European Journal of Wood and Wood Products, online erschienen am 22.11.2026. Verfasst von Peter Bliem und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Natural Resources and Life Sciences Vienna.
Abstract (Originalsprache)
Oriented strand board (OSB) is widely used as a structural wood-based panel in modern timber construction. Due to its layered structure and strand orientation, OSB exhibits pronounced anisotropic and heterogeneous mechanical behaviour. However, the mechanical properties of the individual layers within OSB panels are still insufficiently characterised, although such information is important for advanced material modelling and numerical simulations. This study investigates the layer-specific mechanical properties of industrial OSB/3 panels using bending, compression and tensile tests combined with digital image correlation (DIC). Mechanical tests were performed on entire panels as well as on separated surface and middle layers in both the strong and weak axis directions. The DIC technique was used to measure full-field strain distributions and to determine Young’s modulus and Poisson’s ratios for the investigated material directions. The results revealed significant differences between the individual layers of the OSB panels. Surface layers exhibited higher density and superior mechanical properties compared to the middle layer due to higher compaction and preferential strand alignment during the manufacturing process. In addition, pronounced anisotropic behaviour was observed between the strong and weak axis directions. The measured Poisson’s ratios further reflected the heterogeneous internal structure of the material. The obtained layer-specific mechanical parameters provide a detailed dataset for the characterisation of OSB panels and may support the development of improved orthotropic material models for numerical simulations of OSB-based structural components.
Förderung
- University of Natural Resources and Life Sciences Vienna
Zitieren
APA
Bliem, P., Schneider, A., Pinkl, S., & Riegler, M. (2026). Layer-specific mechanical properties of OSB panels using digital image correlation. European Journal of Wood and Wood Products, 84(6). https://doi.org/10.1007/s00107-026-02518-x
Vancouver
Bliem P, Schneider A, Pinkl S, Riegler M. Layer-specific mechanical properties of OSB panels using digital image correlation. European Journal of Wood and Wood Products. 2026;84(6). doi:10.1007/s00107-026-02518-x
BibTeX
@article{Bliem2026,
author = {Bliem, Peter and Schneider, Alexander and Pinkl, Stefan and Riegler, Martin},
title = {Layer-specific mechanical properties of OSB panels using digital image correlation},
journal = {European Journal of Wood and Wood Products},
year = {2026},
volume = {84},
number = {6},
doi = {10.1007/s00107-026-02518-x}
}
EUVIMED