EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Substitution of wood fibres with pine needles in the production of low-density boards for building applications

Dorota Dukarska, Jakub Kawalerczyk, Ľuboš Krišťák, Maria Ekwińska, Rupali Tiwari, Miroslav Němec, Radosław Mirski

European Journal of Wood and Wood Products · 2026-08 · 84 (4)

DOI: 10.1007/s00107-026-02462-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Wood and Wood Products, online erschienen am 13.08.2026. Verfasst von Dorota Dukarska und 6 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agentúra Ministerstva Školstva, Vedy, Výskumu a Športu SR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the effect of substituting wood fibres with pine needles on the properties of low-density fibreboards (LDFs). Boards were produced with 0%, 25%, 50%, 75%, and 100% needles content, and their physical (density, density profile, mat compression ratio, water absorption), mechanical (compressive strength at 10% deformation, internal bond), thermal (thermal conductivity, thermal diffusivity, heat capacity), and acoustic (sound absorption coefficient, noise reduction coefficient) properties were investigated. Partial substitution of wood fibres with needles affected board structure and performance. Average density remained unaffected, but higher needle contents increased local density variations and reduced cross-sectional compactness. Mechanical strength decreased with higher needle content, while boards with up to 50% needles maintained compressive strength and internal bond. Water absorption increased with needle incorporation, but moderate substitution had negligible effect on moisture resistance. Thermal conductivity and diffusivity decreased with higher needle content, enhancing insulation performance, while heat capacity remained unaffected. Acoustic properties improved with needle addition, resulting in higher sound absorption and noise reduction. Overall, partial substitution of wood fibres with pine needles enabled the production of LDFs with optimized physical, mechanical, thermal, and acoustic properties. Among the tested variants, boards containing 50% needles were identified as optimal, offering a favourable combination of structural homogeneity, mechanical strength, and insulating performance. These findings highlight the potential of pine needles as a sustainable alternative biomass for environmentally friendly LDFs with multifunctional properties.

Förderung

  • Agentúra Ministerstva Školstva, Vedy, Výskumu a Športu SR

Zitieren

APA

Dukarska, D., Kawalerczyk, J., Krišťák, Ľ., Ekwińska, M., Tiwari, R., Němec, M., & Mirski, R. (2026). Substitution of wood fibres with pine needles in the production of low-density boards for building applications. European Journal of Wood and Wood Products, 84(4). https://doi.org/10.1007/s00107-026-02462-w

Vancouver

Dukarska D, Kawalerczyk J, Krišťák Ľ, Ekwińska M, Tiwari R, Němec M, et al. Substitution of wood fibres with pine needles in the production of low-density boards for building applications. European Journal of Wood and Wood Products. 2026;84(4). doi:10.1007/s00107-026-02462-w

BibTeX
@article{Dukarska2026,
  author = {Dukarska, Dorota and Kawalerczyk, Jakub and Krišťák, Ľuboš and Ekwińska, Maria and Tiwari, Rupali and Němec, Miroslav and Mirski, Radosław},
  title = {Substitution of wood fibres with pine needles in the production of low-density boards for building applications},
  journal = {European Journal of Wood and Wood Products},
  year = {2026},
  volume = {84},
  number = {4},
  doi = {10.1007/s00107-026-02462-w}
}
Kostenlos starten →