Effect of fibre size distributions and fibre orientation on the thermal conductivity of digitally generated twin structures of wood fibre insulation panels
European Journal of Wood and Wood Products · 2026-08 · 84 (4)
DOI: 10.1007/s00107-026-02457-7 ↗Kurz gefasst
Fachartikel in der Zeitschrift European Journal of Wood and Wood Products, online erschienen am 10.08.2026. Verfasst von Michael Gurnik und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigated the influence of fibre length and thickness distributions, as well as fibre orientation, on the thermal conductivity of digitally generated twin structures of wood fibre insulation panels (WFIP). For this purpose, virtual fibre structures with varying fibre sizes and orientations were systematically generated using the methodology of design of experiments (DoE) based on data obtained from a real WFIP and their thermal conductivity calculated. The defined regions of interest for the DoE relied on previously observed size distributions and orientations of fibres in the WFIP assessed by means of a fibre scanner and 3D CT analyses of physical WFIPs. In order to calculate the thermal conductivity, numerical simulation software was utilised, with the anisotropic thermal conductivity properties of wood fibres being designated as the input values. It has been demonstrated that the orientation of the fibres has the most significant impact on the thermal conductivity properties of the modelled fibre structures. The difference in calculated thermal conductivity between the most favourable and least favourable fibre orientations was approximately 20%, while fibre length contributed to a difference of approximately 4%. Fibre thickness had a smaller, non-significant effect. The evaluation of the DoE demonstrated a high degree of fit, with the results evidently substantiating the efficacy of the process of virtual twin generation in conjunction with a DoE and numerical calculations.
Zitieren
APA
Gurnik, M., Aderhold, J., Meinlschmidt, P., & Mai, C. (2026). Effect of fibre size distributions and fibre orientation on the thermal conductivity of digitally generated twin structures of wood fibre insulation panels. European Journal of Wood and Wood Products, 84(4). https://doi.org/10.1007/s00107-026-02457-7
Vancouver
Gurnik M, Aderhold J, Meinlschmidt P, Mai C. Effect of fibre size distributions and fibre orientation on the thermal conductivity of digitally generated twin structures of wood fibre insulation panels. European Journal of Wood and Wood Products. 2026;84(4). doi:10.1007/s00107-026-02457-7
BibTeX
@article{Gurnik2026,
author = {Gurnik, Michael and Aderhold, Jochen and Meinlschmidt, Peter and Mai, Carsten},
title = {Effect of fibre size distributions and fibre orientation on the thermal conductivity of digitally generated twin structures of wood fibre insulation panels},
journal = {European Journal of Wood and Wood Products},
year = {2026},
volume = {84},
number = {4},
doi = {10.1007/s00107-026-02457-7}
}
EUVIMED