EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tribological properties and related effects of compressed, thermally modified and wax-impregnated wood

O. Waßmann, S.I.-U. Ahmed

European Journal of Wood and Wood Products · 2024-12 · 82 (6) · 2155-2168

DOI: 10.1007/s00107-024-02145-4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Wood and Wood Products, online erschienen am 23.10.2024. Verfasst von O. Waßmann und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ostfalia Hochschule für angewandte Wissenschaften - Hochschule Braunschweig/Wolfenbüttel.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper develops a process for the preparation of modified wood with low friction and low wear for tribological applications such as self-lubricating bearings. Two types of wood, beech ( Fagus sylvatica ) and robinia ( Robinia pseudoacacia ), have been studied and the results compared with naturally lubricated native lignum vitae. The process developed consists of plasticisation followed by compression in a mould, thermal modification and subsequent wax impregnation. Plasticisation was carried out by conditioning the samples to a low equilibrium moisture content of 10%, followed by heating to a sample core temperature of 80 °C. This process protects the internal wood structure from mechanical damage during densification. After plasticisation, the wood was compressed in a press mould. A low springback effect (SBE), resulting in compression of up to 40%, was achieved by unloading the mould without opening it. This step optimises compressive strength and hardness. Subsequent heat treatment reduces thickness swelling by up to 85%. Finally, a wax impregnation was applied to reduce friction. Sliding wear tests on modified beech wood have shown that the lowest wear occurs in the cross-sectional orientation (load perpendicular to the fibre ends; rxt orientation). Sliding friction studies using a steel ball on a ball-on-disc tribometer showed that compressed and thermally modified samples impregnated with rapeseed wax or beeswax exhibited coefficients of friction in a range of 0.08 to 0.09. These values are almost four times lower than those of plain compressed wood and even lower than those of lignum vitae, which was used for plain bearings decades ago. This study clearly demonstrates the high potential of compressed, thermally modified and wax-impregnated wood.

Förderung

  • Ostfalia Hochschule für angewandte Wissenschaften - Hochschule Braunschweig/Wolfenbüttel

Zitieren

APA

Waßmann, O., & Ahmed, S. (2024). Tribological properties and related effects of compressed, thermally modified and wax-impregnated wood. European Journal of Wood and Wood Products, 82(6), 2155-2168. https://doi.org/10.1007/s00107-024-02145-4

Vancouver

Waßmann O, Ahmed S. Tribological properties and related effects of compressed, thermally modified and wax-impregnated wood. European Journal of Wood and Wood Products. 2024;82(6):2155-2168. doi:10.1007/s00107-024-02145-4

BibTeX
@article{Wamann2024,
  author = {Waßmann, O. and Ahmed, S.I.-U.},
  title = {Tribological properties and related effects of compressed, thermally modified and wax-impregnated wood},
  journal = {European Journal of Wood and Wood Products},
  year = {2024},
  volume = {82},
  number = {6},
  pages = {2155--2168},
  doi = {10.1007/s00107-024-02145-4}
}
Kostenlos starten →