EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Sustainable Pb (II) Removal via Pine‐Bark Biochar Valorization: Removal Mechanisms and Response‐Surface Modeling

Eun-Chae Im, Jae-In Lee, Seong-Jik Park iD, Chang-Gu Lee iD

Water Environment Research · 2026-11 · 98 (11)

DOI: 10.1002/wer.70640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Environment Research, online erschienen am 27.10.2026. Verfasst von Eun-Chae Im und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Environmental Engineering, Ajou University, Suwon, Republic of Korea. Hauptthemen laut MEDLINE: Charcoal, Lead, Pinus, Plant Bark. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Korea Institute of Planning and Evaluation for Technology in Food, Agriculture, Forestry and Fisheries.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lead (Pb (II)) is a persistent contaminant in industrial wastewater. This study evaluated pine bark (PB)‐derived biochars produced at different pyrolysis temperatures for Pb (II) removal. Biochar produced at 500°C (PB5) achieved the highest removal efficiency and was selected for subsequent experiments. The adsorption equilibrium for PB5 was best described using the Sips isotherm, indicating energetic heterogeneity, whereas its kinetics followed the pseudo‐second‐order model. The maximum monolayer adsorption capacity estimated using the Langmuir model was 29.754 mg/g, with combined spectroscopic, elemental, and textural analyses suggesting that Pb‐containing surface precipitation and pore blocking/filling played major roles in Pb removal. Response surface methodology was used to optimize the pH, adsorbent dosage, temperature, and ionic strength, with the PB5 dosage found to have the strongest influence on adsorption, followed by the pH, ionic strength, and temperature. Among the investigated experimental conditions, the highest removal efficiency of 91.43% was achieved at pH 7, an adsorbent dosage of 5 g/L, a temperature of 25°C, and an ionic strength of 5. The developed RSM model showed satisfactory agreement with the experimental data, with a root mean square error (RMSE) of 3.75 percentage points.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CharcoalLeadPinusPlant BarkWater Pollutants, ChemicalAdsorptionKineticsHydrogen-Ion ConcentrationTemperatureOsmolar Concentration

Stichwörter der Autor:innen

Pb (II) adsorptionbiocharpore fillingprecipitationwaste resource utilization

Substanzen

CharcoalLeadbiocharWater Pollutants, Chemical

Autor:innen und Institutionen

  • Department of Environmental Engineering, Ajou University, Suwon, Republic of Korea.
  • Institute of Agricultural Environmental Science, Hankyong National University, Anseong, Republic of Korea.
  • Department of Bioresources and Rural System Engineering, Hankyong National University, Anseong, Republic of Korea.
  • Department of Energy Systems Research, Ajou University, Suwon, Republic of Korea.

ORCID-Profile: Seong-Jik Park, Chang-Gu Lee

Förderung

  • Korea Institute of Planning and Evaluation for Technology in Food, Agriculture, Forestry and Fisheries

Zitieren

APA

Im, E. C., Lee, J. I., Park, S. J., & Lee, C. G. (2026). Sustainable Pb (II) Removal via Pine‐Bark Biochar Valorization: Removal Mechanisms and Response‐Surface Modeling. Water Environment Research, 98(11). https://doi.org/10.1002/wer.70640

Vancouver

Im EC, Lee JI, Park SJ, Lee CG. Sustainable Pb (II) Removal via Pine‐Bark Biochar Valorization: Removal Mechanisms and Response‐Surface Modeling. Water Environment Research. 2026;98(11). doi:10.1002/wer.70640

BibTeX
@article{Im2026,
  author = {Im, Eun-Chae and Lee, Jae-In and Park, Seong-Jik and Lee, Chang-Gu},
  title = {Sustainable Pb (II) Removal via Pine‐Bark Biochar Valorization: Removal Mechanisms and Response‐Surface Modeling},
  journal = {Water Environment Research},
  year = {2026},
  volume = {98},
  number = {11},
  doi = {10.1002/wer.70640}
}
Kostenlos starten →