EUVIMEDEUVIMED entdecken
Crossref

Coupled Effects of Nanomaterial‐Modified Anodes on Temperature, pH Stability, and COD Removal in Microbial Fuel Cells

Mehmet Burak Bostan iD, Fikret Polat iD

Water Environment Research · 2026

DOI: 10.1002/wer.70619 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Environment Research, 2026. Verfasst von Mehmet Burak Bostan und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Faculty of Engineering, Düzce University, Düzce, Türkiye. Hauptthemen laut MEDLINE: Bioelectric Energy Sources, Nanostructures, Waste Disposal, Fluid. Die Arbeit nennt 47 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microbial fuel cells (MFCs) are a very promising method for wastewater treatment along with energy generation. But one of their biggest factors that affect their functioning is the environmental conditions such as temperature and pH, which regulate microbial activity and electron transfer as well. This work dealt with the effects of nanomaterial‐modified anodes and exposure to temperature change, pH fluctuations, and voltage production of the single‐chamber MFCs treating real domestic wastewater. Nine MFC systems, with a control one and eight nanomaterial‐coated anodes (CNT, Al 2 O 3 , TiO 2 , Fe 2 O 3 , CeO 2 , ZnO, activated carbon, and boron nitride), were run for 14 days under the same conditions. Modification to the MFC system with nanoparticles led to different temperature patterns of the MFC systems and the BN‐modified system showed the highest temperature values. Temperature and voltage output showed a strong positive relationship, which was identified through correlation analysis ( r ≈ 0.81), and on the other hand, a moderate negative relationship was reported between pH and voltage ( r ≈ −0.41). These relationships represent statistical associations under the tested conditions and do not establish direct causation. The BN‐modified system combined a comparatively small pH decrease with favorable voltage output during the 14‐day operation. Overall, the results indicate that MFC performance was associated with the combined responses of temperature, pH, COD removal, and electrochemical output under the tested conditions. Among the tested materials, the BN‐modified system showed the most favorable overall combination of these measured responses.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bioelectric Energy SourcesNanostructuresWaste Disposal, FluidHydrogen-Ion ConcentrationTemperatureElectrodesBiological Oxygen Demand Analysis

Stichwörter der Autor:innen

COD removalboron nitridemicrobial fuel cellnanomaterialspHtemperaturewastewater treatment

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Faculty of Engineering, Düzce University, Düzce, Türkiye.
  • Sustainable Enegy Technologies Application and Research Center, Duzce University, Duzce, Türkiye.

ORCID-Profile: Mehmet Burak Bostan, Fikret Polat

Zitieren

APA

Bostan, M. B., & Polat, F. (2026). Coupled Effects of Nanomaterial‐Modified Anodes on Temperature, pH Stability, and COD Removal in Microbial Fuel Cells. Water Environment Research. https://doi.org/10.1002/wer.70619

Vancouver

Bostan MB, Polat F. Coupled Effects of Nanomaterial‐Modified Anodes on Temperature, pH Stability, and COD Removal in Microbial Fuel Cells. Water Environment Research. 2026. doi:10.1002/wer.70619

BibTeX
@article{Bostan2026,
  author = {Bostan, Mehmet Burak and Polat, Fikret},
  title = {Coupled Effects of Nanomaterial‐Modified Anodes on Temperature, pH Stability, and COD Removal in Microbial Fuel Cells},
  journal = {Water Environment Research},
  year = {2026},
  doi = {10.1002/wer.70619}
}
Kostenlos starten →