Arsenic removal adsorbent using limonite–polyethersulfone composite fiber via continuous flow column process
Water Environment Research · 2024
DOI: 10.1002/wer.10973 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water Environment Research, 2024. Verfasst von Anh Phuong Le Thi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Science and Technology Innovation, Nagaoka University of Technology, Nagaoka, Japan. Hauptthemen laut MEDLINE: Arsenic, Water Purification, Water Pollutants, Chemical, Sulfones. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 57 Literaturangaben.
Abstract (Originalsprache)
This research introduces an enhanced limonite‐based composite fiber adsorbent for arsenic (As) removal. The modification involves creating polyethersulfone (PES)–limonite composite fibers loaded with 60 wt% limonite powders, designed to be applicable in water flow environments. The fibers were prepared using a wet‐spinning process based on phase inversion, with varying concentrations (10, 20, and 30 wt%) of PES in NMP solution. The composite fiber with 10 wt% NMP exhibited a porous structure and demonstrated efficient absorption of both As(III) and As(V). Adsorption followed the Langmuir model, with q m values of 1.5 mg/g for As(III) and 3.2 mg/g for As(V) at pH 6. In column experiments, As removal rates increased with contact time, attributed to decreased flow rates (1 mL/min). Moreover, increasing fiber column height led to enhanced removal rates, as indicated by the Adams–Bohart model. The mechanism for As(V) removal involved the formation of an inner‐sphere complex through ion exchange between α‐FeOOH and HAsO 4 − and H 2 AsO 4 2− in an aqueous solution at pH 6.8. Practitioner Points Changing the polyethersulfone ratio in the composite leads to variations in the appearance of limonite within each composite fiber. Limonite composite fibers effectively remove As(III) and As(V) at neutral pH. The adsorption behavior follows Langmuir kinetic model, the q m of 1.5 mg/g for As(III) and 3.2 mg/g for As(V). Longer columns and contact times enhance arsenic (As) removal in practical water treatment systems. Adam–Bohart model aids in predicting breakthrough and saturation time in As adsorption column design.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Science and Technology Innovation, Nagaoka University of Technology, Nagaoka, Japan.
- Department of Material Science and Technology, Nagaoka University of Technology, Nagaoka, Japan.
ORCID-Profile: Anh Phuong Le Thi
Zitieren
APA
Le Thi, A. P., Zhe, L., & Kobayashi, T. (2024). Arsenic removal adsorbent using limonite–polyethersulfone composite fiber via continuous flow column process. Water Environment Research. https://doi.org/10.1002/wer.10973
Vancouver
Le Thi AP, Zhe L, Kobayashi T. Arsenic removal adsorbent using limonite–polyethersulfone composite fiber via continuous flow column process. Water Environment Research. 2024. doi:10.1002/wer.10973
BibTeX
@article{LeThi2024,
author = {Le Thi, Anh Phuong and Zhe, Li and Kobayashi, Takaomi},
title = {Arsenic removal adsorbent using limonite–polyethersulfone composite fiber via continuous flow column process},
journal = {Water Environment Research},
year = {2024},
doi = {10.1002/wer.10973}
}
EUVIMED