EUVIMEDEUVIMED entdecken
Crossref

Improved disinfection byproduct removal using a polysulfone membrane loaded with powdered activated carbon

Yizhi Hou, Brooke K Mayer iD

Water Environment Research · 2023-07 · 95 (7)

DOI: 10.1002/wer.10908 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Environment Research, online erschienen am 19.07.2023. Verfasst von Yizhi Hou und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil, Construction and Environmental Engineering, Marquette University, Milwaukee, Wisconsin, USA. Hauptthemen laut MEDLINE: Charcoal, Water Purification. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: A.O. Smith Corporation Technology Center.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Powdered activated carbon was immobilized by casting it in a polysulfone polymer membrane, which was then tested for disinfection byproduct (chloroform) and bacteria ( Escherichia coli ) removal. The membrane prepared using 90% T20 carbon and 10% polysulfone (M20‐90) provided a filtration capacity of 2783 L m −2 , adsorption capacity of 2.85 mg g −1 , and 95% chloroform removal in a 10 s empty bed contact time. Flaws and cracks on the membrane surface caused by the carbon particles appeared to reduce chloroform and E. coli removal. To overcome this challenge, up to six layers of the M20‐90 membrane were overlapped, which improved chloroform filtration capacity by 94.6%, to 5416 L m −2 , and increased the adsorption capacity by 93.3%, to 5.51 mg g −1 . E. coli removal also increased from 2.5 logs reduction using a single membrane layer to 6.3 logs using six layers under 10 psi feed pressure. The filtration flux declined from 6.94 m 3 m −2 day −1 psi −1 for a single layer (0.45 mm thick) to 1.26 m 3 m −2 day −1 psi −1 for the six‐layer membrane system (2.7 mm thick). This work demonstrated the feasibility of using powdered activated carbon immobilized on a membrane to improve chloroform adsorption and filtration capacity while simultaneously removing microbes. Practitioner Points Powdered activated carbon was immobilized on a membrane to improve chloroform adsorption and filtration capacity while simultaneously removing microbes. Membranes made with the smaller carbon particles (T20) delivered better chloroform adsorption performance. Use of multiple layers of the membrane further improved chloroform and Escherichia coli removal.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CharcoalWater PurificationChloroformDisinfectionPowdersEscherichia coliFiltrationPolymersAdsorptionMembranes, ArtificialSulfones

Stichwörter der Autor:innen

E. colichloroformfiltrationpoint-of-use water treatment (POU)trihalomethane (THM)

Substanzen

CharcoalChloroformPowdersPolymersMembranes, Artificialpolysulfone P 1700Sulfones

Autor:innen und Institutionen

  • Department of Civil, Construction and Environmental Engineering, Marquette University, Milwaukee, Wisconsin, USA.
  • A.O. Smith Corporation Technology Center, Milwaukee, Wisconsin, USA.

ORCID-Profile: Brooke K Mayer

Förderung

  • A.O. Smith Corporation Technology Center

Zitieren

APA

Hou, Y., & Mayer, B. K. (2023). Improved disinfection byproduct removal using a polysulfone membrane loaded with powdered activated carbon. Water Environment Research, 95(7). https://doi.org/10.1002/wer.10908

Vancouver

Hou Y, Mayer BK. Improved disinfection byproduct removal using a polysulfone membrane loaded with powdered activated carbon. Water Environment Research. 2023;95(7). doi:10.1002/wer.10908

BibTeX
@article{Hou2023,
  author = {Hou, Yizhi and Mayer, Brooke K},
  title = {Improved disinfection byproduct removal using a polysulfone membrane loaded with powdered activated carbon},
  journal = {Water Environment Research},
  year = {2023},
  volume = {95},
  number = {7},
  doi = {10.1002/wer.10908}
}
Kostenlos starten →