EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward a Process Stable Flame‐Retardant Polyamide 12 Powder for Powder Bed Fusion

Fabian Neitzel, Thomas Frye, Hans‐Joachim Schmid

Journal of Vinyl and Additive Technology · 19.11.2026

DOI: 10.1002/vnl.70165 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vinyl and Additive Technology, online erschienen am 19.11.2026. Verfasst von Fabian Neitzel und 2 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to develop a halogen‐free, flame‐retardant and process stable polyamide 12 powder for laser‐based powder bed fusion with polymers (PBF‐LB/P). Synergistic systems combining aluminum diethylphosphinate (AlPi) with either zinc borate (ZB) or zinc stannate (ZS) were evaluated. Initial screening showed that adding flame‐retardants increased fines content but maintained good powder flowability. Thermal analysis indicated that additives acted as nucleating agents and improved char formation. While the initial blends at best only achieved a UL94 V‐1 rating, increasing the total filler loading to 20 wt% with the 15:1 AlPi:ZB composition led to the desired V‐0 classification. Mechanical testing revealed the typical impact of flame‐retardants as tensile strength and elongation decreased, but stiffness increased. The fabrication of functional parts with a wall thickness of 2 mm seems viable, though dripping limited performance in thinner geometries. Replenishing aged powder with 50% virgin powder resulted in porous parts due to limited coalescence from fragmented flame‐retardant additives and high melt viscosity. However, by refining powder production and mixing processes, the combination of end‐capped polyamide 12 and thermally stable flame‐retardants could offer a viable strategy for creating sustainable flame‐retardant materials for PBF‐LB/P.

Förderung

  • European Regional Development Fund

Zitieren

APA

Neitzel, F., Frye, T., & Schmid, H. (2026). Toward a Process Stable Flame‐Retardant Polyamide 12 Powder for Powder Bed Fusion. Journal of Vinyl and Additive Technology. https://doi.org/10.1002/vnl.70165

Vancouver

Neitzel F, Frye T, Schmid H. Toward a Process Stable Flame‐Retardant Polyamide 12 Powder for Powder Bed Fusion. Journal of Vinyl and Additive Technology. 2026. doi:10.1002/vnl.70165

BibTeX
@article{Neitzel2026,
  author = {Neitzel, Fabian and Frye, Thomas and Schmid, Hans‐Joachim},
  title = {Toward a Process Stable Flame‐Retardant Polyamide 12 Powder for Powder Bed Fusion},
  journal = {Journal of Vinyl and Additive Technology},
  year = {2026},
  doi = {10.1002/vnl.70165}
}
Kostenlos starten →