Development of High‐Efficiency Hybrid Plasticized Polyvinyl Chloride Paste Resin and Its Derived High‐Performance Foam
Journal of Vinyl and Additive Technology · 2026-11 · 32 (6) · 1475-1487
DOI: 10.1002/vnl.70123 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Vinyl and Additive Technology, online erschienen am 20.05.2026. Verfasst von Xiyu Liu und 5 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben.
Abstract (Originalsprache)
Due to the fine particle sizes and interparticle porous structures, polyvinyl chloride (PVC) paste resin produced by microsuspension polymerization is favorable for forming plastisol. However, it requires high processing temperatures or large amounts of external plasticizers to achieve sufficient plasticization, which causes high energy consumption or the risk of plasticizers' migration. In this work, a hybrid plasticization strategy was demonstrated by introducing butyl acrylate (BA) as an internal plasticizing comonomer into PVC paste resin prepared by microsuspension polymerization. A series of poly(vinyl chloride‐butyl acrylate) (PVC‐BA) copolymer paste resins with controlled BA contents were synthesized, and the effects of BA incorporation on chemical structure, particle morphology, thermal property, plasticization behavior, and rheological performance were systematically examined. It could be found that BA copolymerization resulted in not only the reduction in glass transition temperature from 77.8°C of PVC paste resin to 71.6°C of the copolymer, but also an increased specific surface area of 40 m 2 /g. These two structure features had a positive synergistic effect on the practical processing. Plastisol with an efficient plasticizer uptake was achieved at low fusion temperature of 140°C. The modified plastisol exhibited enhanced rheological stability across a broad processing range of 100°C–150°C. Furthermore, PVC foams prepared from the copolymer paste resins displayed refined cellular structures and enhanced mechanical performance, including high ductility and improved elastic recovery. As a result, this work provides an effective strategy for developing high‐value PVC products by microsuspension polymerization, and demonstrates its application in producing energy‐efficient, high‐performance PVC foam.
Zitieren
APA
Liu, X., Li, L., Zhang, C., Du, Z., Ma, Y., & Zou, W. (2026). Development of High‐Efficiency Hybrid Plasticized Polyvinyl Chloride Paste Resin and Its Derived High‐Performance Foam. Journal of Vinyl and Additive Technology, 32(6), 1475-1487. https://doi.org/10.1002/vnl.70123
Vancouver
Liu X, Li L, Zhang C, Du Z, Ma Y, Zou W. Development of High‐Efficiency Hybrid Plasticized Polyvinyl Chloride Paste Resin and Its Derived High‐Performance Foam. Journal of Vinyl and Additive Technology. 2026;32(6):1475-1487. doi:10.1002/vnl.70123
BibTeX
@article{Liu2026,
author = {Liu, Xiyu and Li, Lanxin and Zhang, Chen and Du, Zhongjie and Ma, Yuhong and Zou, Wei},
title = {Development of High‐Efficiency Hybrid Plasticized Polyvinyl Chloride Paste Resin and Its Derived High‐Performance Foam},
journal = {Journal of Vinyl and Additive Technology},
year = {2026},
volume = {32},
number = {6},
pages = {1475--1487},
doi = {10.1002/vnl.70123}
}
EUVIMED