EUVIMEDEUVIMED entdecken
Crossref

Heavy Metal Leachability Tendency of Ladle Furnace Steel Slags: Investigating Stable Slag Matrix for Construction Use

Jyoti Ahlawat, S. K. Singh, Soumitra Maiti

Environmental Quality Management · 2026-11 · 36 (4)

DOI: 10.1002/tqem.70504 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Quality Management, online erschienen am 07.11.2026. Verfasst von Jyoti Ahlawat und 2 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The leachability potential of ladle furnace steel slag (LFSS) is critical for assessing environmental compatibility and sustainability in construction applications. This study systematically investigates the leaching behavior of different LFSS types, focusing on the mobilization of environmentally sensitive heavy metals. Three LFSS variants such as Al‐killed, Al‐Si‐killed, and Si‐killed, produced from different steelmaking routes were examined using standardized protocols: the Toxicity Characteristic Leaching Procedure (TCLP), the Single Batch Test (SBT), and the Long‐Term Leaching Test (LTLT). Experimental variables included leaching medium pH, slag particle size, liquid‐to‐solid (L/S) ratio, and duration. Results reveal variations in leachate composition, specifically in release of the heavy metals that is, Cr, As, Cd, Hg, Pb, Mn, Fe, Co, Ni, Zn, Cu, and Mo. Findings indicate that metal mobilization depends on both slag chemistry and leaching environment acidity, with enhanced leaching under acidic conditions. A comparative analysis shows that Al‐Si‐killed LFSS has the lowest leaching potential, indicating more stable immobilization and precipitation of heavy metals. In contrast, Al‐killed and Si‐killed LFSS show higher leaching, particularly increased manganese release under acidic and alkaline conditions. However, concentrations of other heavy metals remain negligible and within regulatory limits. Long‐term leaching assessments confirm the environmental safety of the tested LFSS variants. Al‐Si killed LFSS found to exhibit lowest or negligible leaching of toxic trace metals particularly in TCLP test. This behavior is attributed to the formation of stable alumino‐silicate network and surface passivation layer which binds the metallic species within the matrix and reduces the mobility. The results support the safe and sustainable use of LFSS in construction. Incorporating suitable binders further reduces leachability by encapsulation and masking effects, enhancing performance.

Zitieren

APA

Ahlawat, J., Singh, S. K., & Maiti, S. (2026). Heavy Metal Leachability Tendency of Ladle Furnace Steel Slags: Investigating Stable Slag Matrix for Construction Use. Environmental Quality Management, 36(4). https://doi.org/10.1002/tqem.70504

Vancouver

Ahlawat J, Singh SK, Maiti S. Heavy Metal Leachability Tendency of Ladle Furnace Steel Slags: Investigating Stable Slag Matrix for Construction Use. Environmental Quality Management. 2026;36(4). doi:10.1002/tqem.70504

BibTeX
@article{Ahlawat2026,
  author = {Ahlawat, Jyoti and Singh, S. K. and Maiti, Soumitra},
  title = {Heavy Metal Leachability Tendency of Ladle Furnace Steel Slags: Investigating Stable Slag Matrix for Construction Use},
  journal = {Environmental Quality Management},
  year = {2026},
  volume = {36},
  number = {4},
  doi = {10.1002/tqem.70504}
}
Kostenlos starten →