Application of Biopolymers in Industrial Effluent Treatment: Evaluation of Chitosan in Tannery Wastewater
Environmental Quality Management · 2026-11 · 36 (4)
DOI: 10.1002/tqem.70503 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Quality Management, online erschienen am 07.11.2026. Verfasst von Leidy Katherine Tafur‐Bravo und 4 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben.
Abstract (Originalsprache)
Tannery process wastewater (TPW) is a complex industrial effluent characterized by a high organic load, elevated concentrations of suspended and dissolved solids, low pH, and residual chromium. Although inorganic coagulants are widely used for its treatment, natural biopolymers recovered from waste biomass offer a potentially more sustainable alternative by reducing reliance on conventional chemical coagulants and contributing to circular resource management. In this study, chitosan, a cationic polysaccharide produced through the deacetylation of chitin, was extracted from whiteleg shrimp ( Litopenaeus vannamei ) exoskeletons and evaluated as a natural coagulant for TPW treatment. The extracted chitosan (EQ) was produced through a chemical sequence comprising demineralization, deproteination, purification, and deacetylation, resulting in a yield of 19.33 %. Its physicochemical quality was assessed by solubility testing, potentiometric titration, and Fourier‐transform infrared (FT‐IR) spectroscopy, which indicated a degree of deacetylation of approximately 80 %. Coagulation–flocculation assays were subsequently conducted using EQ, commercial analytical‐grade chitosan (CQ), and ferric chloride (FC). Treatment performance was evaluated in terms of turbidity, biochemical oxygen demand (BOD 5 ), chemical oxygen demand (COD), total solids, suspended solids, dissolved solids, and Cr(III). EQ effectively reduced the pollutant load of TPW and outperformed CQ for several water‐quality parameters, whereas FC achieved the highest overall removal efficiency. These findings demonstrate that chitosan recovered from shrimp exoskeletons has potential as a natural coagulant or coagulant aid for tannery wastewater treatment, although further optimization of operating conditions, particularly coagulant dose, pH, and integration within the overall treatment train, is required to maximize its treatment performance.
Zitieren
APA
Tafur‐Bravo, L. K., Quevedo‐Salas, R. K., Ramírez‐Jaramillo, M. T., Roa‐Acosta, D. F., & Solanilla‐Duque, J. F. (2026). Application of Biopolymers in Industrial Effluent Treatment: Evaluation of Chitosan in Tannery Wastewater. Environmental Quality Management, 36(4). https://doi.org/10.1002/tqem.70503
Vancouver
Tafur‐Bravo LK, Quevedo‐Salas RK, Ramírez‐Jaramillo MT, Roa‐Acosta DF, Solanilla‐Duque JF. Application of Biopolymers in Industrial Effluent Treatment: Evaluation of Chitosan in Tannery Wastewater. Environmental Quality Management. 2026;36(4). doi:10.1002/tqem.70503
BibTeX
@article{TafurBravo2026,
author = {Tafur‐Bravo, Leidy Katherine and Quevedo‐Salas, Ruby Karina and Ramírez‐Jaramillo, Melanie Teresa and Roa‐Acosta, Diego Fernando and Solanilla‐Duque, José Fernando},
title = {Application of Biopolymers in Industrial Effluent Treatment: Evaluation of Chitosan in Tannery Wastewater},
journal = {Environmental Quality Management},
year = {2026},
volume = {36},
number = {4},
doi = {10.1002/tqem.70503}
}
EUVIMED