EUVIMEDEUVIMED entdecken
Übersichtsarbeit

Chemical Upcycling of Waste Plastics to High Value‐Added Products via Pyrolysis: Current Trends, Future Perspectives, and Techno‐Feasibility Analysis

Ijaz Hussain, Abdullah Aitani, Zuhair Malaibari, Hassan Alasiri, Muhammad Naseem Akhtar, Obaid Fahad Aldosari, Shakeel Ahmed

The Chemical Record · 2023-04 · 23 (4)

DOI: 10.1002/tcr.202200294 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift The Chemical Record, online erschienen am 27.02.2023. Verfasst von Ijaz Hussain und 6 weiteren Autor:innen. Beteiligte Einrichtung: Center for Refining & Advanced Chemicals, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 274 Literaturangaben. Gefördert von: Center for Refining and Advanced Chemicals, Research Institute, King Fahd University of Petroleum and Minerals (KFUPM).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chemical upcycling of waste plastics into high‐value‐added products is one of the most effective, cost‐efficient, and environmentally beneficial solutions. Many studies have been published over the past few years on the topic of recycling plastics into usable materials through a process called catalytic pyrolysis. There is a significant research gap that must be bridged in order to use catalytic pyrolysis of waste plastics to produce high‐value products. This review focuses on the enhanced catalytic pyrolysis of waste plastics to produce jet fuel, diesel oil, lubricants, aromatic compounds, syngas, and other gases. Moreover, the reaction mechanism, a brief and critical comparison of different catalytic pyrolysis studies, as well as the techno‐feasibility analysis of waste plastic pyrolysis and the proposed catalytic plastic pyrolysis setup for commercialization is also covered.

Schlagwörter

Stichwörter der Autor:innen

Chemical upcyclingPlastic waste managementTechno-feasible analysis, PyrolysisValue-added productsWaste plastics

Autor:innen und Institutionen

  • Center for Refining & Advanced Chemicals, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia.
  • Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, Dhahran, 31261, Saudi Arabia.
  • Department of Chemistry, College of Science, Majmaah University, P.O. Box 66, Majmaah, 11952, Saudi Arabia.

Förderung

  • Center for Refining and Advanced Chemicals, Research Institute, King Fahd University of Petroleum and Minerals (KFUPM)

Zitieren

APA

Hussain, I., Aitani, A., Malaibari, Z., Alasiri, H., Naseem Akhtar, M., Fahad Aldosari, O., & Ahmed, S. (2023). Chemical Upcycling of Waste Plastics to High Value‐Added Products via Pyrolysis: Current Trends, Future Perspectives, and Techno‐Feasibility Analysis. The Chemical Record, 23(4). https://doi.org/10.1002/tcr.202200294

Vancouver

Hussain I, Aitani A, Malaibari Z, Alasiri H, Naseem Akhtar M, Fahad Aldosari O, et al. Chemical Upcycling of Waste Plastics to High Value‐Added Products via Pyrolysis: Current Trends, Future Perspectives, and Techno‐Feasibility Analysis. The Chemical Record. 2023;23(4). doi:10.1002/tcr.202200294

BibTeX
@article{Hussain2023,
  author = {Hussain, Ijaz and Aitani, Abdullah and Malaibari, Zuhair and Alasiri, Hassan and Naseem Akhtar, Muhammad and Fahad Aldosari, Obaid and Ahmed, Shakeel},
  title = {Chemical Upcycling of Waste Plastics to High Value‐Added Products via Pyrolysis: Current Trends, Future Perspectives, and Techno‐Feasibility Analysis},
  journal = {The Chemical Record},
  year = {2023},
  volume = {23},
  number = {4},
  doi = {10.1002/tcr.202200294}
}
Kostenlos starten →