EUVIMEDEUVIMED entdecken
Crossref

A Novel Self‐Centering Friction Energy Dissipative Brace: Experimental Investigation and System Response

Tong Li, Jinjie Men, Tao Lan

The Structural Design of Tall and Special Buildings · 2026-11 · 35 (11)

DOI: 10.1002/tal.70181 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Structural Design of Tall and Special Buildings, online erschienen am 12.11.2026. Verfasst von Tong Li und 2 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper reports a novel self‐centering friction energy dissipative brace (SFEB) consisting of the friction damper and the preload combined disc spring working in parallel. The configuration, assembly process, and working principle are discussed first. Following this, the friction mechanism of the combined disc springs is analyzed in depth, and the range of the in‐service friction coefficient of combined disc springs is calibrated. Based on the analysis results, a mechanical model of the SFEB is proposed using the principle of superposition. Subsequently, three SFEB specimens are tested under cyclic loading to examine their hysteresis behavior. Results demonstrate that the friction sources of a typical combined disc spring device mainly originate from the contact between the disc spring and the plate and also the conical surface contact between stacked springs. Due to the friction effect, specimens without energy dissipating (ED) system will also exhibit a certain energy dissipation capability. As the force provided by the ED system increases, the energy dissipation capacity of the SFEB gradually enhances. Finally, a comprehensive system‐level analysis is conducted to evaluate the influence of SFEB with varying self‐centering energy dissipation coefficient γ (the ratio of the preload of combined disc spring to the friction force of ED system) on the structural performance. The results confirm that although reducing γ can eliminate residual deformation of the structure, it leads to amplification of interstory deformation, floor acceleration, and base shear, which not only exacerbates damage to structural and nonstructural components but also increases the initial construction cost of the structure. Integrating the whole life cycle costs of buildings, it is recommended that the γ of SFEB should be greater than 1.5.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, T., Men, J., & Lan, T. (2026). A Novel Self‐Centering Friction Energy Dissipative Brace: Experimental Investigation and System Response. The Structural Design of Tall and Special Buildings, 35(11). https://doi.org/10.1002/tal.70181

Vancouver

Li T, Men J, Lan T. A Novel Self‐Centering Friction Energy Dissipative Brace: Experimental Investigation and System Response. The Structural Design of Tall and Special Buildings. 2026;35(11). doi:10.1002/tal.70181

BibTeX
@article{Li2026,
  author = {Li, Tong and Men, Jinjie and Lan, Tao},
  title = {A Novel Self‐Centering Friction Energy Dissipative Brace: Experimental Investigation and System Response},
  journal = {The Structural Design of Tall and Special Buildings},
  year = {2026},
  volume = {35},
  number = {11},
  doi = {10.1002/tal.70181}
}
Kostenlos starten →