EUVIMEDEUVIMED entdecken
Crossref

Study on Seismic Performance of High‐Strength Steel Frames With Double‐Damage Elements

Hongchao Guo, Hao Li, Chenguang Si, Dongdong Zheng, Yunhe Liu

The Structural Design of Tall and Special Buildings · 2026-11 · 35 (11)

DOI: 10.1002/tal.70180 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Structural Design of Tall and Special Buildings, online erschienen am 13.11.2026. Verfasst von Hongchao Guo und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, an earthquake resilient beam‐column joint of high‐strength steel with double‐damage elements was proposed. Its seismic performance is studied at three levels: metal damper, beam‐column joint, and frame. The study of the metal damper clarified the evolution of the double‐damage elements deformation with loading displacement. On this basis, the calculation method of bearing capacity of joints was proposed. Compared with conventional single‐damage elements, the double‐damage elements enable staged energy dissipation and concentrated damage in replaceable components, while improving joint stiffness and bearing capacity. This design reduces damage to the main structural members and facilitates post‐earthquake repair and recovery, thereby enhancing the seismic resilience of high‐strength steel structures. Through the multiscale finite element model, a six‐story high‐strength steel frame structure with double‐damage elements (RSFEDM) and a common steel frame structure (RSF) was established for dynamic time‐history analysis. Finally, the post‐earthquake recoverable performance of the RSFEDM and RSF was evaluated. Experimental results indicate that the plastic damage region of RSFEDM is mainly concentrated in the double‐damage elements, and the plastic damage of RSF is concentrated in the position of beams and columns; under the effects of seismic acceleration of 0.4 and 0.62 g, the top layer displacement of RSFEDM is reduced by 18.3% and 13.6% than that of RSF; under the same seismic acceleration, the interlayer displacement angle of RSF exceeds 2% rad, corresponding to the FEMA 356‐LS and GB50011‐ME levels, respectively, whereas RSFEDM is within 2%, which meets the specification requirements. According to the GB38591 2020, the post‐earthquake resilience performance of the two frames was evaluated using three indexes: repair costs, repair time, and casualties. The results indicate that RSFEDM is rated two stars, whereas RSF received one star. This demonstrates that RSFEDM possesses excellent post‐earthquake resilience.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Guo, H., Li, H., Si, C., Zheng, D., & Liu, Y. (2026). Study on Seismic Performance of High‐Strength Steel Frames With Double‐Damage Elements. The Structural Design of Tall and Special Buildings, 35(11). https://doi.org/10.1002/tal.70180

Vancouver

Guo H, Li H, Si C, Zheng D, Liu Y. Study on Seismic Performance of High‐Strength Steel Frames With Double‐Damage Elements. The Structural Design of Tall and Special Buildings. 2026;35(11). doi:10.1002/tal.70180

BibTeX
@article{Guo2026,
  author = {Guo, Hongchao and Li, Hao and Si, Chenguang and Zheng, Dongdong and Liu, Yunhe},
  title = {Study on Seismic Performance of High‐Strength Steel Frames With Double‐Damage Elements},
  journal = {The Structural Design of Tall and Special Buildings},
  year = {2026},
  volume = {35},
  number = {11},
  doi = {10.1002/tal.70180}
}
Kostenlos starten →