EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Model‐based systems engineering and safety assessment: A workflow for mechatronic systems design

Imane Bouhali, Agnese Pasquariello, Faida Mhenni, Ferdinando Vitolo, Peter Hehenberger, Stanislao Patalano, Jean‐Yves Choley

Systems Engineering · 2025-03 · 28 (2) · 238-254

DOI: 10.1002/sys.21791 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Systems Engineering, online erschienen am 28.10.2024. Verfasst von Imane Bouhali und 6 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechatronic systems become ever more complex because of their increasing number of interconnected safety critical components and sophistication. MBSE (Model‐based Systems Engineering) and MBSA (Model‐Based Safety Assessment) are the most commonly adopted approaches to deal with the design and safety analysis of mechatronic systems. Unfortunately, both approaches are normally adopted separately, especially in the earlier phases of system design, thus leading to a lack of communication between system engineers and the safety team. This work aims to fill that gap at a high level, that is, through process interaction. This paper proposes an enhanced V‐model for the design of safety‐critical mechatronic systems. It relates a system development process with specific safety assessment methods. Specifically, the proposed workflow details exchange flows between the RFLP (Requirements, Functional, Logical, Physical) method, the FHA (Functional Hazard Analysis), the FMEA (Failure Mode and Effects Analysis), the MBSA and simulation, and the FTA (Fault Tree Analysis). These analyses are complemented with multiphysics modeling and simulation to observe system behavior in functional and failure scenarios, with the aim of requirements verification. The design workflow has been applied to a winged Unmanned Aerial Vehicle to apply the parallel process and the necessary interaction of MBSE and MBSA approaches. The information flows between the individual activities proved effective for designing a safe system before the verification phase. The main benefit of the proposed workflow is providing both the design and safety team with some interaction points, thus avoiding a lack of safety‐critical analysis in the early phases of system design.

Zitieren

APA

Bouhali, I., Pasquariello, A., Mhenni, F., Vitolo, F., Hehenberger, P., Patalano, S., & Choley, J. (2025). Model‐based systems engineering and safety assessment: A workflow for mechatronic systems design. Systems Engineering, 28(2), 238-254. https://doi.org/10.1002/sys.21791

Vancouver

Bouhali I, Pasquariello A, Mhenni F, Vitolo F, Hehenberger P, Patalano S, et al. Model‐based systems engineering and safety assessment: A workflow for mechatronic systems design. Systems Engineering. 2025;28(2):238-254. doi:10.1002/sys.21791

BibTeX
@article{Bouhali2025,
  author = {Bouhali, Imane and Pasquariello, Agnese and Mhenni, Faida and Vitolo, Ferdinando and Hehenberger, Peter and Patalano, Stanislao and Choley, Jean‐Yves},
  title = {Model‐based systems engineering and safety assessment: A workflow for mechatronic systems design},
  journal = {Systems Engineering},
  year = {2025},
  volume = {28},
  number = {2},
  pages = {238--254},
  doi = {10.1002/sys.21791}
}
Kostenlos starten →