EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interface Engineering of Chip Surfaces via Silane Treatments for Robust Underfill Adhesion

Zambaga Otgonbayar, Gyu‐Sik Park, Won‐Chun Oh, Gi‐Hwan Kim, Yoon‐Ho Ra, Jungchul Noh, Hyung Do Kim, Myeongjin Kim, Chang‐Min Yoon

Small Structures · 2026-05 · 7 (5)

DOI: 10.1002/sstr.70471 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Structures, online erschienen am 23.05.2026. Verfasst von Zambaga Otgonbayar und 8 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a silane‐assisted surface modification approach is developed to improve the interfacial reliability of underfill@solder bump assemblies in advanced semiconductor packaging. Conventional underfill processes frequently experience void formation and interfacial delamination at the solder bump and underfill interface, primarily due to inadequate wetting and thermally induced stress accumulation. However, effective interfacial engineering strategies for improving wetting at solder bump surfaces remain limited. To mitigate these issues, three silane coupling agents, (3‐aminopropyl)triethoxysilane (APTES), (3‐glycidyloxypropyl)trimethoxysilane (GPTMS), and phenyltriethoxysilane (PTES), were applied to solder bump surfaces via a solution‐based immersion process. Comparative interfacial analysis revealed that GPTMS‐ and PTES‐treated assemblies formed uniform and continuous underfill–solder interfaces with markedly reduced void formation. From the cross‐section optical microscopy images, the interfacial coverage ratio was measured to be 99.2% for pristine assembly and increased to 99.9% for GPTMS‐ and PTES‐treated assembly, confirming improved interfacial wetting. Thermal reliability evaluation conducted at 150°C for up to 500 h demonstrated that glycidyl‐ and phenyl‐based silanes effectively suppressed void growth and interfacial delamination, with PTES exhibiting the highest interfacial stability under prolonged thermal exposure. These results highlight the critical role of silane interfacial chemistry in governing underfill adhesion and long‐term reliability in high‐density semiconductor packaging.

Zitieren

APA

Otgonbayar, Z., Park, G., Oh, W., Kim, G., Ra, Y., Noh, J., Kim, H. D., Kim, M., & Yoon, C. (2026). Interface Engineering of Chip Surfaces via Silane Treatments for Robust Underfill Adhesion. Small Structures, 7(5). https://doi.org/10.1002/sstr.70471

Vancouver

Otgonbayar Z, Park G, Oh W, Kim G, Ra Y, Noh J, et al. Interface Engineering of Chip Surfaces via Silane Treatments for Robust Underfill Adhesion. Small Structures. 2026;7(5). doi:10.1002/sstr.70471

BibTeX
@article{Otgonbayar2026,
  author = {Otgonbayar, Zambaga and Park, Gyu‐Sik and Oh, Won‐Chun and Kim, Gi‐Hwan and Ra, Yoon‐Ho and Noh, Jungchul and Kim, Hyung Do and Kim, Myeongjin and Yoon, Chang‐Min},
  title = {Interface Engineering of Chip Surfaces via Silane Treatments for Robust Underfill Adhesion},
  journal = {Small Structures},
  year = {2026},
  volume = {7},
  number = {5},
  doi = {10.1002/sstr.70471}
}
Kostenlos starten →