A Hydrogen‐Bonded Dual‐Polymer Binder for Ultrafast Manufacturing of Volume‐Adaptive Silicon Anode Lithium‐Ion Battery
Small Structures · 2026-03 · 7 (3)
DOI: 10.1002/sstr.202500893 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Structures, online erschienen am 24.03.2026. Verfasst von Ruosi Qiao und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.
Abstract (Originalsprache)
Efficient and scalable electrode manufacturing remains a critical challenge for advancing lithium‐ion battery (LIB) technologies. Herein, we report a dual‐function exothermic resin–poly(vinyl alcohol) (ER–PVA) binder system that enables rapid electrode processing and improved mechanical stability. The ER undergoes fast thermal curing at 180°C within 5 minutes, significantly reducing processing time compared with conventional drying protocols. Meanwhile, hydrogen bonding between the carboxyl groups in ER and the hydroxyl groups of PVA enhances electrode adhesion under rapid solvent evaporation, achieving an average peel force of 3.37 N, far exceeding that of the Si||poly(vinylidene fluoride) (PVDF) electrode (0.25 N). Consequently, the Si||ER–PVA electrode exhibits improved structural stability and superior electrochemical performance. Notably, the half cell employing the ER–PVA binder delivers a stable Coulombic efficiency of ∼98% over 100 cycles at 0.2 C and demonstrates good rate reversibility by recovering a capacity of 850.5 mAh g −1 at 0.1 C compared with 617.8 mAh g −1 for the conventional Si||PVDF cell under the same conditions. Meanwhile, the corresponding full cells retain 90.4% of its initial capacity after 50 cycles at 0.25 C. These results demonstrate the strong potential of this ER–PVA binder system for scalable LIB electrode manufacturing.
Förderung
- National Science Foundation
Zitieren
APA
Qiao, R., Zhang, H., Tarafdar, A., Li, H., Saud, M. B., Faheema, M. B., Hoe, A. J., Shi, C., Qiao, Q., & Wang, Y. (2026). A Hydrogen‐Bonded Dual‐Polymer Binder for Ultrafast Manufacturing of Volume‐Adaptive Silicon Anode Lithium‐Ion Battery. Small Structures, 7(3). https://doi.org/10.1002/sstr.202500893
Vancouver
Qiao R, Zhang H, Tarafdar A, Li H, Saud MB, Faheema MB, et al. A Hydrogen‐Bonded Dual‐Polymer Binder for Ultrafast Manufacturing of Volume‐Adaptive Silicon Anode Lithium‐Ion Battery. Small Structures. 2026;7(3). doi:10.1002/sstr.202500893
BibTeX
@article{Qiao2026,
author = {Qiao, Ruosi and Zhang, Haining and Tarafdar, Amirreza and Li, Hansheng and Saud, Madan Bahadur and Faheema, M. Bilal and Hoe, Andrea Jean and Shi, Changmin and Qiao, Quinn and Wang, Yeqing},
title = {A Hydrogen‐Bonded Dual‐Polymer Binder for Ultrafast Manufacturing of Volume‐Adaptive Silicon Anode Lithium‐Ion Battery},
journal = {Small Structures},
year = {2026},
volume = {7},
number = {3},
doi = {10.1002/sstr.202500893}
}
EUVIMED