Tailoring Nio x /Perovskite Interface via a Multifunctional Self‐Assembled Molecule for High‐Performance Blue Perovskite Light‐Emitting Diodes
Small Structures · 2024-10 · 5 (10)
DOI: 10.1002/sstr.202400153 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Structures, online erschienen am 08.08.2024. Verfasst von Huifeng Ji und 10 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Nickel oxide (NiO x ) serves as one of the most promising hole transport materials for perovskite light‐emitting diodes (PeLEDs). However, only moderate PeLED performances have been reported on the pristine NiO x layer due to insufficient hole injection, interfacial exciton quenching, and poor perovskite quality. Herein, a multifunctional molecule of 3‐mercapto‐1‐propanesulfonate (MPS) is demonstrated to successfully tailor the NiO x –perovskite heterogenous interface by addressing the above issues. In detail, the large binding energy between mercapto sulfur and nickel induces preferential self‐assembly of the mercapto group on the NiO x surface, which simultaneously enlarges the NiO x work function by the formation of interfacial dipole and suppresses the trap‐assisted exciton quenching by the passivation of the oxygen vacancies. Meanwhile, the self‐assembled MPS on NiO x also favors high‐quality perovskite films with good morphology, high crystallinity, and reduced defects for efficient carrier radiative recombination. As a result, blue PeLEDs show a remarkable efficiency of 10.4%, representing one of the highest efficiencies for NiO x ‐based blue PeLEDs, as well as a very low turn‐on voltage of 2.8 V. Consequently, this work contributes to an efficient approach to tailor the NiO x –perovskite interface for highly efficient blue PeLEDs.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Ji, H., Ren, Z., Chen, R., Luo, C., Zhou, X., Zheng, Z., Shi, H., Zhang, Y., Chen, H., Peng, H., & Chen, Y. (2024). Tailoring Nio x /Perovskite Interface via a Multifunctional Self‐Assembled Molecule for High‐Performance Blue Perovskite Light‐Emitting Diodes. Small Structures, 5(10). https://doi.org/10.1002/sstr.202400153
Vancouver
Ji H, Ren Z, Chen R, Luo C, Zhou X, Zheng Z, et al. Tailoring Nio x /Perovskite Interface via a Multifunctional Self‐Assembled Molecule for High‐Performance Blue Perovskite Light‐Emitting Diodes. Small Structures. 2024;5(10). doi:10.1002/sstr.202400153
BibTeX
@article{Ji2024,
author = {Ji, Huifeng and Ren, Zhenwei and Chen, Ran and Luo, Chengzhao and Zhou, Xin and Zheng, Zhiyong and Shi, Hengfei and Zhang, Yuze and Chen, Hua and Peng, Huanxi and Chen, Yu},
title = {Tailoring Nio x /Perovskite Interface via a Multifunctional Self‐Assembled Molecule for High‐Performance Blue Perovskite Light‐Emitting Diodes},
journal = {Small Structures},
year = {2024},
volume = {5},
number = {10},
doi = {10.1002/sstr.202400153}
}
EUVIMED