Closing the Loop From Manufacturing Defects to Field Failures: Root Causes, Detection, and Quality Control Strategies for Preventing Thermal Runaway in Lithium‐Ion Batteries
Safety Science and Technology · 14.11.2026
DOI: 10.1002/sst3.70071 ↗Kurz gefasst
Fachartikel in der Zeitschrift Safety Science and Technology, online erschienen am 14.11.2026. Verfasst von Kemila A. Chaudhary und 7 weiteren Autor:innen. Die Arbeit nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Lithium‐ion batteries power consumer electronics, electric vehicles, and stationary energy‐storage systems, yet rare catastrophic failures associated with thermal runaway remain a significant safety concern. Many such failures originate from latent manufacturing defects, including metallic contaminants, coating non‐uniformities, electrode burrs, misalignment, separator damage, defective tab welds, and moisture contamination. These defects may escape conventional end‐of‐line inspection and remain dormant until electrochemical, thermal, or mechanical stresses promote internal short circuits, localized heating, or other failure mechanisms. Existing reviews generally address either defect formation, internal short‐circuit mechanisms, or production inspection methods, but rarely connect these topics across the complete failure lifecycle. This review establishes a closed‐loop framework linking defect generation during manufacturing to detection, field failure, root‐cause analysis, and corrective action. Manufacturing defects are classified according to their process origin and evaluated in terms of potential safety consequences. In‐line inspection, electrical screening, imaging, non‐destructive evaluation, and data‐driven quality‐control approaches are critically examined with emphasis on their detection capabilities and limitations. A systematic methodology for field‐failure analysis is also presented, incorporating initial triage, non‐destructive examination, controlled disassembly, physicochemical characterization, production traceability, and root‐cause assessment. Representative incidents involving consumer electronics, aviation, electric vehicles, and stationary energy‐storage systems are used to illustrate how manufacturing defects, design margins, inspection limitations, and system‐level factors can interact in service. Finally, gaps between conventional safety qualification and rare latent‐defect detection are discussed, together with priorities for predictive monitoring, integrated production and field data, and closed‐loop quality systems capable of improving battery safety as manufacturing scale and cell technologies continue to evolve.
Zitieren
APA
Chaudhary, K. A., Chaudhari, R. L., Chaudhari, V., Panchal, H. P., Chaudhari, A. S., Patel, Y. N., Kumar, R., & Chaudhary, K. J. (2026). Closing the Loop From Manufacturing Defects to Field Failures: Root Causes, Detection, and Quality Control Strategies for Preventing Thermal Runaway in Lithium‐Ion Batteries. Safety Science and Technology. https://doi.org/10.1002/sst3.70071
Vancouver
Chaudhary KA, Chaudhari RL, Chaudhari V, Panchal HP, Chaudhari AS, Patel YN, et al. Closing the Loop From Manufacturing Defects to Field Failures: Root Causes, Detection, and Quality Control Strategies for Preventing Thermal Runaway in Lithium‐Ion Batteries. Safety Science and Technology. 2026. doi:10.1002/sst3.70071
BibTeX
@article{Chaudhary2026,
author = {Chaudhary, Kemila A. and Chaudhari, Ronit L. and Chaudhari, Vatsal and Panchal, Harsh P. and Chaudhari, Arjun S. and Patel, Yashkumar N. and Kumar, Rawesh and Chaudhary, Kirankumar J.},
title = {Closing the Loop From Manufacturing Defects to Field Failures: Root Causes, Detection, and Quality Control Strategies for Preventing Thermal Runaway in Lithium‐Ion Batteries},
journal = {Safety Science and Technology},
year = {2026},
doi = {10.1002/sst3.70071}
}
EUVIMED