EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Pore Generation in Clay via Co‐pyrolysis With Biomass Feedstocks: Toward Low‐Cost Adsorbents for Pollutant Control

Li Qiu, Chao Li, Qianqian Jiang, Mengjiao Fan, Shu Zhang, Mortaza Gholizadeh, Xun Hu

Safety Science and Technology · 16.11.2026

DOI: 10.1002/sst3.70058 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Safety Science and Technology, online erschienen am 16.11.2026. Verfasst von Li Qiu und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Clay is abundant and low‐cost; yet its limited porosity greatly restricts its use in adsorption‐based pollutant control. Here, we propose an in situ pore‐generation strategy by co‐pyrolyzing clay with biomass feedstocks. During pyrolysis, biomass releases volatiles and undergoes shrinkage, which can create channels and voids within the surrounding clay matrix. To verify this concept, clay was co‐pyrolyzed with sawdust, cellulose, lignin, poplar leaves, banana peels, flour, and bio‐oil at 700°C–900°C. Pyrolysis of clay alone produced a residue with negligible porosity ( S BET = 1.3 m 2 ·g −1 ), whereas co‐pyrolysis with biomass increased S BET to 18.2–287.5 1.3 m 2 ·g −1 and markedly promoted pore development. Biomass composition strongly influenced the pore structure: sawdust, cellulose, and lignin mainly generated microporous composites, whereas feedstocks richer in aliphatic structures favored mesopore formation. In situ DRIFTS showed that the evolution of the clay/char composite was governed by biomass decomposition, and that secondary condensation of volatiles formed hydrophobic carbonaceous deposits on the surface. Overall, this work demonstrates a simple and effective route for converting low‐porosity clay into porous clay/char composites with tunable pore structures, offering promise as low‐cost adsorbents for the control of hazardous organic contaminants and related environmental risk mitigation.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Qiu, L., Li, C., Jiang, Q., Fan, M., Zhang, S., Gholizadeh, M., & Hu, X. (2026). In Situ Pore Generation in Clay via Co‐pyrolysis With Biomass Feedstocks: Toward Low‐Cost Adsorbents for Pollutant Control. Safety Science and Technology. https://doi.org/10.1002/sst3.70058

Vancouver

Qiu L, Li C, Jiang Q, Fan M, Zhang S, Gholizadeh M, et al. In Situ Pore Generation in Clay via Co‐pyrolysis With Biomass Feedstocks: Toward Low‐Cost Adsorbents for Pollutant Control. Safety Science and Technology. 2026. doi:10.1002/sst3.70058

BibTeX
@article{Qiu2026,
  author = {Qiu, Li and Li, Chao and Jiang, Qianqian and Fan, Mengjiao and Zhang, Shu and Gholizadeh, Mortaza and Hu, Xun},
  title = {In Situ Pore Generation in Clay via Co‐pyrolysis With Biomass Feedstocks: Toward Low‐Cost Adsorbents for Pollutant Control},
  journal = {Safety Science and Technology},
  year = {2026},
  doi = {10.1002/sst3.70058}
}
Kostenlos starten →