EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Propagation Characteristics of Aluminum/Propylene Oxide Multiphase Cloud Explosion With Different AlH 3 Ratios and Initiation Energies

Hangwei Wan, Min Wang, Jianhong Yang, Qi Zhang

Safety Science and Technology · 2026-06 · 1 (2)

DOI: 10.1002/sst3.70011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Safety Science and Technology, online erschienen am 21.04.2026. Verfasst von Hangwei Wan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fuel‐air explosives (FAE) are an important source of explosion energy. The density advantage of aluminum hydride (AlH 3 ) dust is obvious compared with that of liquid components. However, the feasibility of adding AlH 3 to promote multiphase cloud detonation and increase energy is lack of exploration. In this paper, the explosion process of propylene oxide (PO)/Al/AlH 3 /air was investigated by numerical simulation. Peak pressure and temperature of PO/air explosion increase first and then decrease with increasing mass concentration under weak ignition, reaching the maximum at 150 g/m 3 , approximately 1.01 MPa and 2700 K, respectively. The peak overpressure of PO/Al/AlH 3 /air cloud detonation initially increases and then decreases with the increase of AlH 3 content, reaching a maximum overpressure of 5.16 MPa at 20% AlH 3 under weak ignition; at a high AlH 3 content (32%), the reaction process of multi‐phase cloud undergoes deflagration‐to‐detonation transition. The PO/Al/AlH 3 /air multiphase clouds under strong ignition detonation have reached a quasi‐detonation state, with a detonation velocity of about 1650 m/s; at an AlH 3 content of 24%, the peak detonation reflection pressure of multiphase cloud reaches a maximum of 2.986 MPa. In addition, the flow field and reaction mechanism of PO/Al/AlH 3 multiphase cloud explosion were analyzed. We expect to provide a reference for the development of new high‐energy fuels.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wan, H., Wang, M., Yang, J., & Zhang, Q. (2026). Propagation Characteristics of Aluminum/Propylene Oxide Multiphase Cloud Explosion With Different AlH 3 Ratios and Initiation Energies. Safety Science and Technology, 1(2). https://doi.org/10.1002/sst3.70011

Vancouver

Wan H, Wang M, Yang J, Zhang Q. Propagation Characteristics of Aluminum/Propylene Oxide Multiphase Cloud Explosion With Different AlH 3 Ratios and Initiation Energies. Safety Science and Technology. 2026;1(2). doi:10.1002/sst3.70011

BibTeX
@article{Wan2026,
  author = {Wan, Hangwei and Wang, Min and Yang, Jianhong and Zhang, Qi},
  title = {Propagation Characteristics of Aluminum/Propylene Oxide Multiphase Cloud Explosion With Different AlH 3 Ratios and Initiation Energies},
  journal = {Safety Science and Technology},
  year = {2026},
  volume = {1},
  number = {2},
  doi = {10.1002/sst3.70011}
}
Kostenlos starten →