Ti Microalloying Enhances Corrosion Resistance of HRB600E Seismic Rebar in Three Typical Marine Corrosion Stages
steel research international · 20.11.2026
DOI: 10.1002/srin.70789 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 20.11.2026. Verfasst von Yunqie Mao und 8 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
HRB600E high‐strength seismic rebar is widely used in critical infrastructure, where its strength–toughness and corrosion resistance are essential for structural safety. The corrosion failure of rebar is a progressive multistage process that is difficult to fully suppress by conventional protection methods. This study focuses on HRB600E seismic rebar. The effects of titanium content on the corrosion behavior of HRB600E rebar in three typical marine corrosion stages were investigated using potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X‐ray photoelectron spectroscopy (XPS). The results show that the introduction of Ti can regulate rebar corrosion resistance from three aspects: pitting initiation inhibition, corrosion propagation retardation, and long‐term matrix protection. Increasing the Ti content modifies SiO 2 –MnO inclusions into high‐TiO 2 composite inclusions to reduce the matrix–inclusion potential difference and inhibit pitting initiation, refines grains via inclusion‐induced nucleation and grain boundary pinning to homogenize corrosion current, and promotes the formation of compact TiO 2 ‐rich corrosion product layers to block aggressive species penetration. This work systematically reveals the mechanism by which Ti microalloying regulates the corrosion resistance of high‐strength seismic rebar, providing theoretical guidance for the industrial production of HRB600E seismic rebar with excellent mechanical properties and high corrosion resistance.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Mao, Y., Li, Y., Sun, M., Ma, S., Mi, Z., Ma, Y., Nie, D., Yang, R., & Wang, H. (2026). Ti Microalloying Enhances Corrosion Resistance of HRB600E Seismic Rebar in Three Typical Marine Corrosion Stages. steel research international. https://doi.org/10.1002/srin.70789
Vancouver
Mao Y, Li Y, Sun M, Ma S, Mi Z, Ma Y, et al. Ti Microalloying Enhances Corrosion Resistance of HRB600E Seismic Rebar in Three Typical Marine Corrosion Stages. steel research international. 2026. doi:10.1002/srin.70789
BibTeX
@article{Mao2026,
author = {Mao, Yunqie and Li, Yang and Sun, Meng and Ma, Shuai and Mi, Zhenxing and Ma, Yanshuo and Nie, Dengyunfei and Yang, Rui and Wang, Hao},
title = {Ti Microalloying Enhances Corrosion Resistance of HRB600E Seismic Rebar in Three Typical Marine Corrosion Stages},
journal = {steel research international},
year = {2026},
doi = {10.1002/srin.70789}
}
EUVIMED