Thermomechanical Modeling and Irreversible Deformation Analysis of a Ruhrstahl–Heraeus Degasser Lower Vessel Refractory Lining
steel research international · 20.11.2026
DOI: 10.1002/srin.70783 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 20.11.2026. Verfasst von Zeinab Naji und 2 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The thermomechanical behavior of the sidewall of a Ruhrstahl–Heraeus (RH) degasser lower vessel under cyclic operation is studied using finite element modeling approach. Two distinct constitutive material models are applied to characterize the irreversible behavior of the working lining in contact with molten steel. The von Mises creep and the Drucker–Prager models are used to simulate creep behavior and shear failure, respectively. The Drucker–Prager creep model is then employed to identify the dominant failure mechanism. The results of the creep and shear analyses are compared to assess the influence of each phenomenon on the thermomechanical response of the lining. It is shown that the deformation behavior of the working lining is strongly depth‐dependent. Creep dominates near the hot face, while shear failure governs the intermediate region where stresses are highest. The results indicate that irreversible behavior is controlled primarily by creep and shear‐driven inelasticity rather than tensile failure under the confined thermal conditions of the RH vessel.
Zitieren
APA
Naji, Z., Jin, S., & Gruber, D. (2026). Thermomechanical Modeling and Irreversible Deformation Analysis of a Ruhrstahl–Heraeus Degasser Lower Vessel Refractory Lining. steel research international. https://doi.org/10.1002/srin.70783
Vancouver
Naji Z, Jin S, Gruber D. Thermomechanical Modeling and Irreversible Deformation Analysis of a Ruhrstahl–Heraeus Degasser Lower Vessel Refractory Lining. steel research international. 2026. doi:10.1002/srin.70783
BibTeX
@article{Naji2026,
author = {Naji, Zeinab and Jin, Shengli and Gruber, Dietmar},
title = {Thermomechanical Modeling and Irreversible Deformation Analysis of a Ruhrstahl–Heraeus Degasser Lower Vessel Refractory Lining},
journal = {steel research international},
year = {2026},
doi = {10.1002/srin.70783}
}
EUVIMED