EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prospects of Eliminating Fluorspar Consumption in a Sustainable Argon‐Oxygen‐Decarburization Process

Yu‐Chiao Lu, Fredrik Engström, Jyrki Pitkälä, Mikael Ersson

steel research international · 18.08.2026

DOI: 10.1002/srin.70639 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 18.08.2026. Verfasst von Yu‐Chiao Lu und 3 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Swedish Governmental Agency for Innovation Systems.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fluorspar serves the critical functions of facilitating lime dissolution and liquid slag formation in the argon‐oxygen‐decarburization (AOD) process. Yet, it is a material with long‐term supply risks that requires a gradual replacement. Thermodynamic calculations and industrial AOD trials were performed in this study to identify different pathways for eliminating fluorpsar addition during the production of 304 stainless steel. FactSage calculations suggest that the suitable amount of flux to replace 5 wt% CaF 2 during the reduction phase (B4 = 1.6) is 20 wt% Al 2 O 3 , 5 wt% Na 2 O, 5 wt% K 2 O, or 3 wt% Li 2 O. Likewise, the suitable amount of flux to replace 12 wt% CaF 2 during the desulphurization phase (B4 = 2.1) is 20 wt% Al 2 O 3 , 9 wt% Na 2 O, 12 wt% K 2 O, or 6 wt% Li 2 O. During one industrial AOD trial where 50 wt% of ferrosilicon reducing agent was replaced by aluminum, the overall fluorspar consumption was reduced by 75% in weight and the final sulfur content in the liquid steel at tapping was two times lower than that measured during the reference heat. In summary, the application of an aluminum reduction agent or the addition of alternative fluxes are both effective strategies for eliminating fluorspar without compromising the quality of the steel produced.

Förderung

  • Swedish Governmental Agency for Innovation Systems

Zitieren

APA

Lu, Y., Engström, F., Pitkälä, J., & Ersson, M. (2026). Prospects of Eliminating Fluorspar Consumption in a Sustainable Argon‐Oxygen‐Decarburization Process. steel research international. https://doi.org/10.1002/srin.70639

Vancouver

Lu Y, Engström F, Pitkälä J, Ersson M. Prospects of Eliminating Fluorspar Consumption in a Sustainable Argon‐Oxygen‐Decarburization Process. steel research international. 2026. doi:10.1002/srin.70639

BibTeX
@article{Lu2026,
  author = {Lu, Yu‐Chiao and Engström, Fredrik and Pitkälä, Jyrki and Ersson, Mikael},
  title = {Prospects of Eliminating Fluorspar Consumption in a Sustainable Argon‐Oxygen‐Decarburization Process},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70639}
}
Kostenlos starten →