EUVIMEDEUVIMED entdecken
Crossref

Numerical Investigation of Inclusion‐Induced Stress in Continuously Cast Bloom During Soft Reduction

Ziwen Zhao, Qi Jia, Chang Liu, Zhen Qin, Wen Yan, Guangqiang Li, Qiang Wang

steel research international · 27.07.2026

DOI: 10.1002/srin.70619 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 27.07.2026. Verfasst von Ziwen Zhao und 6 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the effect of inclusions on local stress distribution during the multipass soft reduction of GCr15 blooms, a finite element model was established based on a 300 × 400 mm bloom caster. The model incorporated the main technological parameters of the straightening and withdrawal process and employed an explicit dynamic formulation together with an elastoplastic constitutive model to evaluate the stress evolution in the bloom and the inclusion‐induced stress concentration. The bloom undergoes inhomogeneous deformation through the thickness during soft reduction. The maximum stress reaches 755.7 MPa in the roll bite region. For spherical MnS and Al 2 O 3 inclusions, the maximum matrix stress is mainly concentrated in the tangential direction relative to the compression loading. Under identical conditions, TiN inclusions induce the highest peak stress of 2181.5 MPa, followed by Al 2 O 3 inclusions with a peak stress of 742.7 MPa, while MnS inclusions produce the lowest stress concentration. Compared with isolated inclusions, adjacent inclusions cause more severe stress superposition in the surrounding matrix. As the spacing between two Al 2 O 3 inclusions decreases from 5 to 1 μm, the peak stress increases from 864.5 to 1305.4 MPa, indicating an increased risk of local crack initiation.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhao, Z., Jia, Q., Liu, C., Qin, Z., Yan, W., Li, G., & Wang, Q. (2026). Numerical Investigation of Inclusion‐Induced Stress in Continuously Cast Bloom During Soft Reduction. steel research international. https://doi.org/10.1002/srin.70619

Vancouver

Zhao Z, Jia Q, Liu C, Qin Z, Yan W, Li G, et al. Numerical Investigation of Inclusion‐Induced Stress in Continuously Cast Bloom During Soft Reduction. steel research international. 2026. doi:10.1002/srin.70619

BibTeX
@article{Zhao2026,
  author = {Zhao, Ziwen and Jia, Qi and Liu, Chang and Qin, Zhen and Yan, Wen and Li, Guangqiang and Wang, Qiang},
  title = {Numerical Investigation of Inclusion‐Induced Stress in Continuously Cast Bloom During Soft Reduction},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70619}
}
Kostenlos starten →