EUVIMEDEUVIMED entdecken
Crossref

Synergistic Optimization of Strength and Toughness in a Low‐Carbon Cu‐Bearing Steel via Tempering Temperature: Role of Reversed Austenite

Mingxue Sun, Fuyong Wang, Yang Xu

steel research international · 29.06.2026

DOI: 10.1002/srin.70588 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 29.06.2026. Verfasst von Mingxue Sun und 2 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focused on the relationship between the microstructure and mechanical properties of a Cu‐bearing steel treated by quenching and tempering. The evolution of strengthening and toughening mechanisms at different tempering temperatures was discussed in detail. The influence of tempering temperature on the quantity, morphology, and thermal stability of reversed austenite (RA) was systematically explored, thus revealing its mechanism in enhancing the low‐temperature toughness. At a tempering temperature of 650 °C, an optimal microstructure was obtained, characterized by a high content (15.3%) of film‐like RA, along with the appropriately sized Cu‐rich precipitates (about 11 nm) and fine lath structures. The steel achieved a yield strength of 824 MPa, tensile strength of 894 MPa, elongation of 23.60%, and impact energy of 204 J at −80 °C, demonstrating a remarkable combination of mechanical properties. On the contrary, only a small amount of blocky RA was formed at 630 °C, while tempering at 680 °C caused the decomposition of RA, both of which led to a significant decrease in toughness. These results revealed that the mechanical properties were significantly improved through optimized composition design and process refinement, providing theoretical support and practical approaches for designing high‐performance low‐carbon Cu‐bearing steels.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Sun, M., Wang, F., & Xu, Y. (2026). Synergistic Optimization of Strength and Toughness in a Low‐Carbon Cu‐Bearing Steel via Tempering Temperature: Role of Reversed Austenite. steel research international. https://doi.org/10.1002/srin.70588

Vancouver

Sun M, Wang F, Xu Y. Synergistic Optimization of Strength and Toughness in a Low‐Carbon Cu‐Bearing Steel via Tempering Temperature: Role of Reversed Austenite. steel research international. 2026. doi:10.1002/srin.70588

BibTeX
@article{Sun2026,
  author = {Sun, Mingxue and Wang, Fuyong and Xu, Yang},
  title = {Synergistic Optimization of Strength and Toughness in a Low‐Carbon Cu‐Bearing Steel via Tempering Temperature: Role of Reversed Austenite},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70588}
}
Kostenlos starten →