Mechanism of Enhanced Bending Fatigue Performance of GCr15 Steel via Multiscale Microstructural Synergistic Regulation by Double‐Quenching Process
steel research international · 26.06.2026
DOI: 10.1002/srin.70586 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 26.06.2026. Verfasst von Jian Zhang und 7 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben.
Abstract (Originalsprache)
To improve the service reliability of high‐carbon bearing steels under complex alternating stresses, a novel heat treatment route combining double quenching and low‐temperature tempering was proposed in this study. The effects of this process on the microstructural evolution and four‐point bending fatigue behavior of GCr15 steel were systematically investigated. Multiscale characterization techniques, including SEM, EBSD, and TEM, were employed to elucidate the evolution of prior austenite grain structure, martensitic transformation behavior, and nanoscale carbide precipitation mechanisms. The results demonstrated that, compared with the conventional single‐quenching process, the double‐quenching treatment significantly refined the microstructure. The prior austenite grain size was reduced from 18.61 to 5.23 μm, and the martensite lath width decreased from 4.8 to 2.8 μm. EBSD analysis further revealed that the fraction of high‐angle grain boundaries increased from 26.55% to 35.83% after secondary quenching, thereby constructing an effective grain‐boundary barrier network. Four‐point bending fatigue tests indicated that the optimized microstructure fundamentally improved the fatigue performance. The crack propagation path exhibited frequent deflection, branching, and blunting due to the synergistic effects of grain boundaries, refined martensite laths, and dispersed carbides.
Zitieren
APA
Zhang, J., Guo, C., Xia, D., Li, X., Liu, S., Wang, S., Chen, P., & Wang, Z. (2026). Mechanism of Enhanced Bending Fatigue Performance of GCr15 Steel via Multiscale Microstructural Synergistic Regulation by Double‐Quenching Process. steel research international. https://doi.org/10.1002/srin.70586
Vancouver
Zhang J, Guo C, Xia D, Li X, Liu S, Wang S, et al. Mechanism of Enhanced Bending Fatigue Performance of GCr15 Steel via Multiscale Microstructural Synergistic Regulation by Double‐Quenching Process. steel research international. 2026. doi:10.1002/srin.70586
BibTeX
@article{Zhang2026,
author = {Zhang, Jian and Guo, Chuang and Xia, Dianxiu and Li, Xiucheng and Liu, Shuran and Wang, Shouren and Chen, Peidun and Wang, Zhongxue},
title = {Mechanism of Enhanced Bending Fatigue Performance of GCr15 Steel via Multiscale Microstructural Synergistic Regulation by Double‐Quenching Process},
journal = {steel research international},
year = {2026},
doi = {10.1002/srin.70586}
}
EUVIMED