EUVIMEDEUVIMED entdecken
Crossref

Enhanced Impact Toughness of 22Mn2SiCrV Bainitic Steel: Contributions from Ferrite and Microstructural Refinement by Vanadium Carbide Precipitates

Ping Luo, Zhunli Tan, Xianjun Li, Yanru Liu, Yike Huang, Wenliang Zhang, Yujiao Shang, Min Zhang

steel research international · 05.06.2026

DOI: 10.1002/srin.70573 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 05.06.2026. Verfasst von Ping Luo und 7 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The individual and synergistic effects of ferrite and vanadium addition on the tensile strength and impact toughness of two Mn–Si–Cr bainitic steels (22Mn2SiCrV and 22Mn2Si2Cr) are systematically investigated. Two heat treatment routes—annealing–bainite‐based quenching–tempering (A‐BQ‐T) and annealing–intercritical bainite‐based quenching–tempering (A‐IBQ‐T)—were applied to the two steels, yielding four conditions: A‐BQ‐T, A‐BQ‐T‐V, A‐IBQ‐T, and A‐IBQ‐T‐V. Among these, the A‐IBQ‐T‐V samples exhibited the best mechanical properties, achieving a tensile strength of 1538 MPa and an impact toughness of 83.2 J. The results indicated that the combined effects of ferrite and vanadium carbide precipitates (VCs)‐induced microstructural refinement are the key factors responsible for the superior combination of high strength and adequate toughness. Such austenite/ferrite interfaces and VCs provide more nucleation sites for A‐IBQ‐T‐V samples. Furthermore, transmission electron microscopy and electron backscatter diffraction observations revealed that these features promote multi‐directional growth, resulting in refined final microstructures and high fraction of high‐angle misorientations. Besides, it is also noted that while the Ac 1 and Ac 3 temperatures are raised by vanadium addition, the martensite start temperature and the critical cooling rate to obtain full martensite remain largely insensitive to vanadium content.

Zitieren

APA

Luo, P., Tan, Z., Li, X., Liu, Y., Huang, Y., Zhang, W., Shang, Y., & Zhang, M. (2026). Enhanced Impact Toughness of 22Mn2SiCrV Bainitic Steel: Contributions from Ferrite and Microstructural Refinement by Vanadium Carbide Precipitates. steel research international. https://doi.org/10.1002/srin.70573

Vancouver

Luo P, Tan Z, Li X, Liu Y, Huang Y, Zhang W, et al. Enhanced Impact Toughness of 22Mn2SiCrV Bainitic Steel: Contributions from Ferrite and Microstructural Refinement by Vanadium Carbide Precipitates. steel research international. 2026. doi:10.1002/srin.70573

BibTeX
@article{Luo2026,
  author = {Luo, Ping and Tan, Zhunli and Li, Xianjun and Liu, Yanru and Huang, Yike and Zhang, Wenliang and Shang, Yujiao and Zhang, Min},
  title = {Enhanced Impact Toughness of 22Mn2SiCrV Bainitic Steel: Contributions from Ferrite and Microstructural Refinement by Vanadium Carbide Precipitates},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70573}
}
Kostenlos starten →