EUVIMEDEUVIMED entdecken
Crossref

Effect of Annealing Temperature on the Microstructural Evolution and Mechanical Properties of AISI 631 Strip

Biao Wang, Jianqiao Wang, Qinsheng He, Fang Li, Xingzheng Zou, Hao Li, Shiqing Zhang, Zhou Yu, Hong Wang, Zhen Zhao, Yuanshou Tang, Kangxu Luo

steel research international · 11.05.2026

DOI: 10.1002/srin.70527 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 11.05.2026. Verfasst von Biao Wang und 11 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigated the effects of annealing temperature (750°C–1050°C) on the microstructural evolution and mechanical properties of AISI 631 stainless steel thin strips for bearing applications. Microstructural characterization was performed using X‐ray diffraction (XRD), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD), while mechanical properties were evaluated via three‐point bending tests, Vickers hardness measurements, and tensile testing. At annealing temperatures below 950°C, Cr‐rich M23C6 carbides precipitated along grain boundaries and within grains, effectively pinning grain boundaries. With increasing annealing temperature, both the fraction of low‐angle grain boundaries (LAGBs) and the Kernel Average Misorientation (KAM) decreased. The variant was identified as the dominant martensitic variant following annealing at 750°C. Microhardness and tensile strength progressively decreased with rising annealing temperature, while three‐point bending tests indicated that the springback angle diminished with increasing grain size. These findings provide new insights into the interplay among microstructure, crystallographic orientation, and bending behavior in AISI 631 strips, offering a theoretical foundation for optimizing heat‐treatment processes.

Zitieren

APA

Wang, B., Wang, J., He, Q., Li, F., Zou, X., Li, H., Zhang, S., Yu, Z., Wang, H., Zhao, Z., Tang, Y., & Luo, K. (2026). Effect of Annealing Temperature on the Microstructural Evolution and Mechanical Properties of AISI 631 Strip. steel research international. https://doi.org/10.1002/srin.70527

Vancouver

Wang B, Wang J, He Q, Li F, Zou X, Li H, et al. Effect of Annealing Temperature on the Microstructural Evolution and Mechanical Properties of AISI 631 Strip. steel research international. 2026. doi:10.1002/srin.70527

BibTeX
@article{Wang2026,
  author = {Wang, Biao and Wang, Jianqiao and He, Qinsheng and Li, Fang and Zou, Xingzheng and Li, Hao and Zhang, Shiqing and Yu, Zhou and Wang, Hong and Zhao, Zhen and Tang, Yuanshou and Luo, Kangxu},
  title = {Effect of Annealing Temperature on the Microstructural Evolution and Mechanical Properties of AISI 631 Strip},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.70527}
}
Kostenlos starten →