EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Double Annealing on the Microstructure and Mechanical Properties of a Medium Manganese Steel

Mattia Franceschi, Jose A. Jimenez, Carlos Garcia‐Mateo, Radhakanta Rana

steel research international · 24.03.2026

DOI: 10.1002/srin.202501219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 24.03.2026. Verfasst von Mattia Franceschi und 3 weiteren Autor:innen. Die Arbeit nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Research Executive Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the evolution of microstructure and mechanical behavior in medium manganese steel subjected to double intercritical annealing was investigated. Austenite reversion transformation (ART) occurred during both single (730°C) and double intercritical annealing (700°C and 750°C). A complex ultrafine microstructure consisting of three phases—retained austenite, martensite, and ferrite—with fine carbides was formed after single annealing. Following double annealing at 700°C, the martensite generated during the first intercritical annealing reverted to austenite, resulting in the maximum stabilized austenite fraction and a final microstructure composed mainly of ferrite and retained austenite. When the second annealing temperature was increased to 750°C, a larger amount of austenite was formed; however, its reduced thermal stability caused partial transformation into martensite. Double intercritical annealing thus produced multiple populations of austenite and ferrite/martensite phases with varying thermal and mechanical stabilities, enhancing the overall mechanical performance. The strength was maximized after high‐temperature (750°C) double annealing, whereas elongation and ductility were optimized at the lower annealing temperature (700°C).

Förderung

  • European Research Executive Agency

Zitieren

APA

Franceschi, M., Jimenez, J. A., Garcia‐Mateo, C., & Rana, R. (2026). Effect of Double Annealing on the Microstructure and Mechanical Properties of a Medium Manganese Steel. steel research international. https://doi.org/10.1002/srin.202501219

Vancouver

Franceschi M, Jimenez JA, Garcia‐Mateo C, Rana R. Effect of Double Annealing on the Microstructure and Mechanical Properties of a Medium Manganese Steel. steel research international. 2026. doi:10.1002/srin.202501219

BibTeX
@article{Franceschi2026,
  author = {Franceschi, Mattia and Jimenez, Jose A. and Garcia‐Mateo, Carlos and Rana, Radhakanta},
  title = {Effect of Double Annealing on the Microstructure and Mechanical Properties of a Medium Manganese Steel},
  journal = {steel research international},
  year = {2026},
  doi = {10.1002/srin.202501219}
}
Kostenlos starten →