EUVIMEDEUVIMED entdecken
Crossref

Numerical Simulation of the Thermal–Mechanical Behavior of Copper/Steel Composite Continuous Casting Mold

Zhenhua Feng, Jinmin Xia, Qingxian Jia, Huanhuan Ruan, Yanhui Sun

steel research international · 2026-11 · 97 (11) · 5416-5429

DOI: 10.1002/srin.202500929 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 05.11.2025. Verfasst von Zhenhua Feng und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A 3D quarter‐symmetry multiphysics model of a continuous casting slab mold is developed and validated against plant thermocouple measurements. The thermal–mechanical response of mold plates fabricated from CrZrCu alloy, pure copper, and steel is examined for three configurations: monolithic CrZrCu, bilayer CrZrCu + Cu, and trilayer CrZrCu + Cu + Steel. It is shown that the maximum temperatures along the hot‐face centerline of the wide plate for the three configurations are 378, 363, and 376 °C, respectively; the maximum vertical displacements at the mold top are 0.12, 0.20, and 0.17 mm, and at the mold bottom are 0.12, 0.13, and 0.13 mm, respectively; the monolithic CrZrCu mold shows the best overall performance. The bilayer design provides the highest heat transfer efficiency with the lowest hot‐face temperature but exhibits the greatest thermal distortion. The trilayer design reduces heat transfer and results in the highest hot‐face temperature, though still below the solidus of CrZrCu, with intermediate deformation.

Förderung

  • Fundamental Research Funds for the Central Universities of China

Zitieren

APA

Feng, Z., Xia, J., Jia, Q., Ruan, H., & Sun, Y. (2026). Numerical Simulation of the Thermal–Mechanical Behavior of Copper/Steel Composite Continuous Casting Mold. steel research international, 97(11), 5416-5429. https://doi.org/10.1002/srin.202500929

Vancouver

Feng Z, Xia J, Jia Q, Ruan H, Sun Y. Numerical Simulation of the Thermal–Mechanical Behavior of Copper/Steel Composite Continuous Casting Mold. steel research international. 2026;97(11):5416-5429. doi:10.1002/srin.202500929

BibTeX
@article{Feng2026,
  author = {Feng, Zhenhua and Xia, Jinmin and Jia, Qingxian and Ruan, Huanhuan and Sun, Yanhui},
  title = {Numerical Simulation of the Thermal–Mechanical Behavior of Copper/Steel Composite Continuous Casting Mold},
  journal = {steel research international},
  year = {2026},
  volume = {97},
  number = {11},
  pages = {5416--5429},
  doi = {10.1002/srin.202500929}
}
Kostenlos starten →