EUVIMEDEUVIMED entdecken
Crossref

Effects of Cr Content on Microstructure, Texture, and Properties of 0.3 mm 3.3 wt% Si Nonoriented Electrical Steels

Fu‐Xing Wang, Zhi‐Hui Wang, Fu‐Qiang Li, Dong‐Mei Chen, Hai‐Tao Liu

steel research international · 2026-05 · 97 (5) · 2693-2704

DOI: 10.1002/srin.202500828 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 14.11.2025. Verfasst von Fu‐Xing Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the effects of the addition of nonferromagnetic Cr on the microstructure, texture, magnetic, and mechanical properties of 0.3 mm‐thick 3.3 Si +0.7Al (wt%) nonoriented electrical steel. It is found that, on one hand, the addition of Cr promotes the precipitation of M 7 C 3 carbides and inhibits recovery and recrystallization, thus resulting in the reduction of grain sizes in hot‐rolled, normalized, and annealed sheets. The smaller grains prior to cold rolling finally enhance the detrimental γ ‐fiber (//ND) recrystallization texture. On the other hand, the addition of Cr significantly increases the electrical resistivity of steels. Therefore, as the Cr content increases, the magnetic induction B 50 significantly decreases while the iron loss P 15/50 increases. By contrast, the iron loss P 10/400 decreases first and then increases whereas P 10/1000 steadily decreases. These results suggest that Cr‐alloying is an effective way to reduce the iron loss at testing frequencies ≥ 400 Hz. In addition, it is found that the yield strength of the annealed sheets increases as the Cr content increases mainly by solid solution strengthening and precipitation strengthening.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, F., Wang, Z., Li, F., Chen, D., & Liu, H. (2026). Effects of Cr Content on Microstructure, Texture, and Properties of 0.3 mm 3.3 wt% Si Nonoriented Electrical Steels. steel research international, 97(5), 2693-2704. https://doi.org/10.1002/srin.202500828

Vancouver

Wang F, Wang Z, Li F, Chen D, Liu H. Effects of Cr Content on Microstructure, Texture, and Properties of 0.3 mm 3.3 wt% Si Nonoriented Electrical Steels. steel research international. 2026;97(5):2693-2704. doi:10.1002/srin.202500828

BibTeX
@article{Wang2026,
  author = {Wang, Fu‐Xing and Wang, Zhi‐Hui and Li, Fu‐Qiang and Chen, Dong‐Mei and Liu, Hai‐Tao},
  title = {Effects of Cr Content on Microstructure, Texture, and Properties of 0.3 mm 3.3 wt% Si Nonoriented Electrical Steels},
  journal = {steel research international},
  year = {2026},
  volume = {97},
  number = {5},
  pages = {2693--2704},
  doi = {10.1002/srin.202500828}
}
Kostenlos starten →