EUVIMEDEUVIMED entdecken
Crossref

Influence of Hot Deformation on MnS Inclusions and the Composite Inclusions in 20MnCr5 Gear Steel Bars

Zhipeng Dai, Zhishun Yang, Jian Yang, Qingsong Zhang, Qing Yin, Mei Zhang, Xuhui Wang, Liang Wang

steel research international · 2026-05 · 97 (5) · 2478-2492

DOI: 10.1002/srin.202500656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 08.11.2025. Verfasst von Zhipeng Dai und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The control of morphologies of MnS inclusions is crucial for the development of high‐quality gear steels. In this study, single‐pass compression tests are conducted on 20MnCr5 gear steel bars using a hot deformation machine. The effects of different hot deformation conditions on the morphology of MnS and its composite inclusions are investigated. The results show that after hot deformation with different deformation amounts, the long strip MnS can be broken into several small segments, while the irregular MnS can be broken into a large block and a small block of MnS. The sulfides with oxides as the core may deform into nearly spindle shape or conical shape. The composite inclusions may also separate into small pieces of MnS, oxide, and MnS+oxide after crushing. When the deformation temperature is 950 °C. and the deformation amount is 30%, the inclusions undergo fragmentation, with the smallest particle size and the lowest aspect ratio. As the cooling rate is increased, the size and aspect ratio of inclusions decrease, and the quantity of inclusions increases. Therefore, the inclusions have the best morphologies after hot rolling when the deformation amount is 30% and the deformation temperature is 950 °C.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Dai, Z., Yang, Z., Yang, J., Zhang, Q., Yin, Q., Zhang, M., Wang, X., & Wang, L. (2026). Influence of Hot Deformation on MnS Inclusions and the Composite Inclusions in 20MnCr5 Gear Steel Bars. steel research international, 97(5), 2478-2492. https://doi.org/10.1002/srin.202500656

Vancouver

Dai Z, Yang Z, Yang J, Zhang Q, Yin Q, Zhang M, et al. Influence of Hot Deformation on MnS Inclusions and the Composite Inclusions in 20MnCr5 Gear Steel Bars. steel research international. 2026;97(5):2478-2492. doi:10.1002/srin.202500656

BibTeX
@article{Dai2026,
  author = {Dai, Zhipeng and Yang, Zhishun and Yang, Jian and Zhang, Qingsong and Yin, Qing and Zhang, Mei and Wang, Xuhui and Wang, Liang},
  title = {Influence of Hot Deformation on MnS Inclusions and the Composite Inclusions in 20MnCr5 Gear Steel Bars},
  journal = {steel research international},
  year = {2026},
  volume = {97},
  number = {5},
  pages = {2478--2492},
  doi = {10.1002/srin.202500656}
}
Kostenlos starten →