EUVIMEDEUVIMED entdecken
Crossref

Effect of Carburizing and Carbonitriding Temperatures on the Microstructure and Wear Resistance of 18Cr2Ni4WA Steel with Carburizing–Carbonitriding Heat Treatment

Qing‐da Li, Ke Chen, Qi‐yuan Chen, Zhen‐guang Liu, Qing‐yu Zhang, Yue‐dong Yuan, Xiao‐nan Wang

steel research international · 2025-11 · 96 (11) · 95-107

DOI: 10.1002/srin.202401078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 26.03.2025. Verfasst von Qing‐da Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: Heilongjiang Bayi Agricultural University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study systematically investigates the effects of carburizing and carbonitriding temperatures on the microstructural evolution and wear resistance of 18Cr2Ni4WA steel. The surface layer after carburizing–carbonitriding treatment comprises acicular/lath martensite, residual austenite, and dispersed carbides, with microstructural gradients dependent on processing parameters. Elevated carburizing temperatures (930–970 °C with 850 °C carbonitriding) marginally reduce surface microhardness and harden layer depth, while increasing carbonitriding temperature to 880 °C (930 °C carburizing) significantly decreases hardness and accelerates softening at depth. Microstructural analysis reveals that higher carbonitriding temperature (880 °C) promotes grain coarsening, reduces carbide fraction, and increases residual austenite content, attributed to altered carbon/nitrogen diffusion kinetics and solute supersaturation. Wear resistance correlates strongly with carbide dispersion and grain refinement, and the 930 °C carburizing and 850 °C carbonitriding sample exhibiting the lowest wear rate, 61.5% lower than conventional carburized specimens, due to optimized nitrogen‐containing martensite and dislocation pinning by fine carbides. These findings demonstrate that synergistic control of carburizing and carbonitriding temperatures enables tailored surface engineering, achieving enhanced wear resistance through nanoscale carbide distribution and stabilized martensitic matrices, offering critical insights for manufacturing high‐performance gears and aerospace components.

Förderung

  • Heilongjiang Bayi Agricultural University

Zitieren

APA

Li, Q., Chen, K., Chen, Q., Liu, Z., Zhang, Q., Yuan, Y., & Wang, X. (2025). Effect of Carburizing and Carbonitriding Temperatures on the Microstructure and Wear Resistance of 18Cr2Ni4WA Steel with Carburizing–Carbonitriding Heat Treatment. steel research international, 96(11), 95-107. https://doi.org/10.1002/srin.202401078

Vancouver

Li Q, Chen K, Chen Q, Liu Z, Zhang Q, Yuan Y, et al. Effect of Carburizing and Carbonitriding Temperatures on the Microstructure and Wear Resistance of 18Cr2Ni4WA Steel with Carburizing–Carbonitriding Heat Treatment. steel research international. 2025;96(11):95-107. doi:10.1002/srin.202401078

BibTeX
@article{Li2025,
  author = {Li, Qing‐da and Chen, Ke and Chen, Qi‐yuan and Liu, Zhen‐guang and Zhang, Qing‐yu and Yuan, Yue‐dong and Wang, Xiao‐nan},
  title = {Effect of Carburizing and Carbonitriding Temperatures on the Microstructure and Wear Resistance of 18Cr2Ni4WA Steel with Carburizing–Carbonitriding Heat Treatment},
  journal = {steel research international},
  year = {2025},
  volume = {96},
  number = {11},
  pages = {95--107},
  doi = {10.1002/srin.202401078}
}
Kostenlos starten →