EUVIMEDEUVIMED entdecken
Crossref

Wear‐Resistant Mn‐B Steel with Synergy of High Strength and Toughness

Mengqi Li, Jian Zheng, Zhi Liu, Yang Zhao, Liqing Chen

steel research international · 2025-11 · 96 (11) · 567-576

DOI: 10.1002/srin.202401034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 13.05.2025. Verfasst von Mengqi Li und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mn‐B steel exhibits excellent wear resistance and has a wide application as land‐touch components in agricultural machines. However, in cultivation, the strength and toughness often cannot meet the requirements, resulting in accelerated failure due to wear or breakage. In this study, a novel wear‐resistant Mn‐B steel with a synergy of high strength and toughness is designed. The effects of tempering temperature on the microstructure, mechanical properties, and wear resistance are investigated by tensile, Charpy impact, and abrasive wear tests, as well as SEM, XRD, and TEM. The results show that increasing tempering temperature at 150–350 °C leads to the gradual precipitation of ε‐carbide and θ‐Fe 3 C. Meanwhile, the martensite and retained austenite decompose, and the dislocation density gradually decreases. These microstructural changes cause a gradual decrease in strength and hardness, as well as a decrease in wear resistance. Moreover, as the tempering temperature increases, severe wear is observed, and the wear mechanism also changes. In addition to abrasive wear, adhesive wear and oxidation wear gradually appear. When tempered at 150 °C, the steel has the best combination of strength, toughness, and wear resistance, with a tensile strength of 2162 MPa and an impact absorbed energy of 43 J.

Zitieren

APA

Li, M., Zheng, J., Liu, Z., Zhao, Y., & Chen, L. (2025). Wear‐Resistant Mn‐B Steel with Synergy of High Strength and Toughness. steel research international, 96(11), 567-576. https://doi.org/10.1002/srin.202401034

Vancouver

Li M, Zheng J, Liu Z, Zhao Y, Chen L. Wear‐Resistant Mn‐B Steel with Synergy of High Strength and Toughness. steel research international. 2025;96(11):567-576. doi:10.1002/srin.202401034

BibTeX
@article{Li2025,
  author = {Li, Mengqi and Zheng, Jian and Liu, Zhi and Zhao, Yang and Chen, Liqing},
  title = {Wear‐Resistant Mn‐B Steel with Synergy of High Strength and Toughness},
  journal = {steel research international},
  year = {2025},
  volume = {96},
  number = {11},
  pages = {567--576},
  doi = {10.1002/srin.202401034}
}
Kostenlos starten →