Mechanical Properties and Microstructure of Laser Powder Bed Fusion‐Processed 18Ni300 Maraging Steel According to Direct Aging Treatment Conditions
steel research international · 2025-01 · 96 (1)
DOI: 10.1002/srin.202400348 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 24.09.2024. Verfasst von Gun Woo No und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Ministry of Trade, Industry and Energy, National Research Foundation of Korea.
Abstract (Originalsprache)
The nonequilibrium microstructures produced by laser‐based additive manufacturing can enhance the mechanical properties of metallic alloys. However, the optimal post‐treatment conditions will change according to the initial microstructure induced by the manufacturing process employed. Therefore, this study investigates the optimal direct aging conditions for the post‐treatment of laser powder bed fusion‐processed 18Ni300 maraging steel by changing the aging temperature and time. The aging time required to achieve maximum tensile strength decreased as the aging temperature increased, and an increase in the aging temperature accelerated the evolution of nanoscale precipitates. The results indicate that the optimal direct aging conditions of 520 °C for 2 h achieved the largest tensile strength (≈2100 MPa) and precipitate area fraction. Notably, the reduced aging time at this temperature compared with that under conventional aging conditions (8 h at 460 °C or 490 °C) minimizes the thickening of the (Mo,Ti)‐rich segregation, which otherwise contributes to austenite reversion and strength reduction owing to overaging. Thus, the optimal direct aging conditions for additively manufactured maraging steel components are different from those for conventionally produced maraging steel components. This understanding of the microstructural changes induced by direct aging according to the initial non‐equilibrium state provides vital information for enhancing the performance of additively manufactured metallic alloys.
Förderung
- Ministry of Trade, Industry and Energy
- National Research Foundation of Korea
Zitieren
APA
No, G. W., Jeong, J., Ryu, G. H., Seol, J. B., & Kim, J. G. (2025). Mechanical Properties and Microstructure of Laser Powder Bed Fusion‐Processed 18Ni300 Maraging Steel According to Direct Aging Treatment Conditions. steel research international, 96(1). https://doi.org/10.1002/srin.202400348
Vancouver
No GW, Jeong J, Ryu GH, Seol JB, Kim JG. Mechanical Properties and Microstructure of Laser Powder Bed Fusion‐Processed 18Ni300 Maraging Steel According to Direct Aging Treatment Conditions. steel research international. 2025;96(1). doi:10.1002/srin.202400348
BibTeX
@article{No2025,
author = {No, Gun Woo and Jeong, Jonghyun and Ryu, Gyeong Hee and Seol, Jae Bok and Kim, Jung Gi},
title = {Mechanical Properties and Microstructure of Laser Powder Bed Fusion‐Processed 18Ni300 Maraging Steel According to Direct Aging Treatment Conditions},
journal = {steel research international},
year = {2025},
volume = {96},
number = {1},
doi = {10.1002/srin.202400348}
}
EUVIMED