EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Uncertainty Quantification in Modeling Mold Heat Transfer in Steel Continuous Slab Casting with CON1D

Scott Wells, Brian G. Thomas

steel research international · 2024-11 · 95 (11)

DOI: 10.1002/srin.202400118 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 26.05.2024. Verfasst von Scott Wells und 1 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Colorado School of Mines.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Computational models are powerful tools to quantify physical phenomena to gain valuable insights into a manufacturing process. Their accuracy is hindered, however, by uncertainty in the input data. Furthermore, when calibrating models with plant measurements, it helps to understand which variables have greatest effect on the critical model outputs. This work applies uncertainty quantification and sensitivity analysis to determine the most influential input parameters in the CON1D model of heat transfer and solidification in steel continuous casting with slag. Results show that the slag rim greatly affects heat flux near the meniscus, so control of its size is important. Heat flux and temperature down the mold depend greatly on velocity of the solid slag layer, and slag solidification temperature, which control the slag layer thickness, which in turn affects the interfacial resistance that controls heat transfer in the process. Scale formation on the mold coldface greatly increases mold temperatures. Based on the results presented here, models of heat transfer in continuous casting such as CON1D would benefit from plant measurements such as slag rim size and solid slag velocity, and lab measurements such as slag viscosity at lower temperatures, to better characterize this important slag property.

Förderung

  • Colorado School of Mines

Zitieren

APA

Wells, S., & Thomas, B. G. (2024). Uncertainty Quantification in Modeling Mold Heat Transfer in Steel Continuous Slab Casting with CON1D. steel research international, 95(11). https://doi.org/10.1002/srin.202400118

Vancouver

Wells S, Thomas BG. Uncertainty Quantification in Modeling Mold Heat Transfer in Steel Continuous Slab Casting with CON1D. steel research international. 2024;95(11). doi:10.1002/srin.202400118

BibTeX
@article{Wells2024,
  author = {Wells, Scott and Thomas, Brian G.},
  title = {Uncertainty Quantification in Modeling Mold Heat Transfer in Steel Continuous Slab Casting with CON1D},
  journal = {steel research international},
  year = {2024},
  volume = {95},
  number = {11},
  doi = {10.1002/srin.202400118}
}
Kostenlos starten →