EUVIMEDEUVIMED entdecken
Crossref

Investigation of Micromechanical Properties of Martensite and Ferrite Microphases in a 35CHGSA Medium‐Si Low‐Alloy Steel

Ali Khajesarvi, Seyed Sadegh Ghasemi Banadkouki, Mahesh C. Somani, Jukka Kömi, Seyed Abdolkarim Sajjadi

steel research international · 2024-03 · 95 (3)

DOI: 10.1002/srin.202300624 ↗

Kurz gefasst

Fachartikel in der Zeitschrift steel research international, online erschienen am 02.01.2024. Verfasst von Ali Khajesarvi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The purpose of this study is to understand in detail the micromechanical behavior of martensite and ferrite microphases in a medium‐Si 35CHGSA dual‐phase (DP) steel by varying the martensite volume fractions (MVF) and ferrite phase constituents. Light microscopy combined with microhardness measurements is supplemented by field‐emission scanning electron microscopy, electron backscatter diffraction, transmission electron microscopy, and X‐ray diffraction in order to evaluate the micromechanical behavior of martensite and ferrite microphases in relation to the evolving microstructure. The experimental observations illustrate that ferrite microhardness diminishes sharply from 352 to 217 HV5g with the change in ferrite volume fraction (FVF) from 3 to 13%, beyond which it increases abnormally to 245 HV5g with a further increase in VF to 15%. The martensite microhardness too varies significantly depending on the progress of ferrite formation in the intercritical range. The hardness drops with further increase in FVF as a result of longer holding times. These observations are rationalized in part to the mutual interaction of martensite with ferrite, and the variation of martensite and ferrite alloying concentrations, developed as a result of ferrite formation during intercritical holding at 720 °C.

Zitieren

APA

Khajesarvi, A., Banadkouki, S. S. G., Somani, M. C., Kömi, J., & Sajjadi, S. A. (2024). Investigation of Micromechanical Properties of Martensite and Ferrite Microphases in a 35CHGSA Medium‐Si Low‐Alloy Steel. steel research international, 95(3). https://doi.org/10.1002/srin.202300624

Vancouver

Khajesarvi A, Banadkouki SSG, Somani MC, Kömi J, Sajjadi SA. Investigation of Micromechanical Properties of Martensite and Ferrite Microphases in a 35CHGSA Medium‐Si Low‐Alloy Steel. steel research international. 2024;95(3). doi:10.1002/srin.202300624

BibTeX
@article{Khajesarvi2024,
  author = {Khajesarvi, Ali and Banadkouki, Seyed Sadegh Ghasemi and Somani, Mahesh C. and Kömi, Jukka and Sajjadi, Seyed Abdolkarim},
  title = {Investigation of Micromechanical Properties of Martensite and Ferrite Microphases in a 35CHGSA Medium‐Si Low‐Alloy Steel},
  journal = {steel research international},
  year = {2024},
  volume = {95},
  number = {3},
  doi = {10.1002/srin.202300624}
}
Kostenlos starten →