EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Photocorrosion Assessment of Protected Hematite Photoanodes During Accelerated Stress Tests

Victoria Benavente Llorente, Ken J. Jenewein, André Hofer, Andreas Körner, Andreas Hutzler, Attila Kormányos, Julien Bachmann, Serhiy Cherevko

Solar RRL · 2025-12 · 9 (23)

DOI: 10.1002/solr.202500570 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solar RRL, online erschienen am 02.11.2025. Verfasst von Victoria Benavente Llorente und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanostructured α‐hematite (Fe 2 O 3 ) is a widely studied material for photoanode applications, particularly for driving the oxygen evolution reaction (OER) under visible light irradiation in photoelectrochemical (PEC) cells. Our recent work has shown that Fe 2 O 3 suffers from photocorrosion in alkaline and neutral electrolytes, with a noticeable decline in performance after 5 h of operation. This highlights the need for strategies that enhance the stability of Fe 2 O 3 ‐based photoanodes. To enhance the stability of Fe 2 O 3 nanorods (NR), we employed atomic layer deposition (ALD) to coat the NR with a well‐defined, controlled TiO 2 overlayer designed to protect the photoanode from photocorrosion during PEC operation. The influence of overlayer thickness is evaluated regarding the PEC activity, stability, and photocurrent retention in alkaline electrolyte using a PEC scanning flow cell coupled to an inductively coupled plasma mass spectrometer (PEC‐ICP‐MS). This setup can quantify metal dissolution during PEC OER, allowing the characterization of the photo‐degradation under realistic illumination conditions. An accelerated stress test (AST) protocol was designed to drive degradation faster and obtain insightful information about the stability of the TiO 2 @Fe 2 O 3 heterostructures using in situ PEC‐ICP‐MS. PEC‐ICP‐MS measurements demonstrate that the TiO 2 coating significantly enhances the photocorrosion resistance of Fe 2 O 3 NR in alkaline electrolytes during operation. A TiO 2 thickness of 2.8 nm (50 ALD cycles) offered the most favorable compromise between activity, photocurrent retention, and decrease of Fe dissolution. The proposed methodology combines in situ stability quantification and ASTs as a powerful tool to advance material development and can be extended to other protected photoanodes.

Zitieren

APA

Llorente, V. B., Jenewein, K. J., Hofer, A., Körner, A., Hutzler, A., Kormányos, A., Bachmann, J., & Cherevko, S. (2025). In Situ Photocorrosion Assessment of Protected Hematite Photoanodes During Accelerated Stress Tests. Solar RRL, 9(23). https://doi.org/10.1002/solr.202500570

Vancouver

Llorente VB, Jenewein KJ, Hofer A, Körner A, Hutzler A, Kormányos A, et al. In Situ Photocorrosion Assessment of Protected Hematite Photoanodes During Accelerated Stress Tests. Solar RRL. 2025;9(23). doi:10.1002/solr.202500570

BibTeX
@article{Llorente2025,
  author = {Llorente, Victoria Benavente and Jenewein, Ken J. and Hofer, André and Körner, Andreas and Hutzler, Andreas and Kormányos, Attila and Bachmann, Julien and Cherevko, Serhiy},
  title = {In Situ Photocorrosion Assessment of Protected Hematite Photoanodes During Accelerated Stress Tests},
  journal = {Solar RRL},
  year = {2025},
  volume = {9},
  number = {23},
  doi = {10.1002/solr.202500570}
}
Kostenlos starten →