EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thickness Optimization of Front and Recombination ITO in Monolithic Perovskite/Silicon Tandem Solar Cells

Özde Şeyma Kabaklı, Kaitlyn McMullin, Christoph Messmer, Alexander J. Bett, Leonard Tutsch, Martin Bivour, Martin Hermle, Stefan W. Glunz, Patricia S.C. Schulze

Solar RRL · 2024-10 · 8 (20)

DOI: 10.1002/solr.202400454 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solar RRL, online erschienen am 13.09.2024. Verfasst von Özde Şeyma Kabaklı und 8 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fraunhofer-Gesellschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optical losses of perovskite/silicon tandem solar cells can be effectively reduced by optimizing the thin‐film layer thicknesses. Herein, the thicknesses of DC sputtered indium tin oxide (ITO) films, which serve as the front electrode and the recombination layer connecting the subcells, are optimized to reach high transparency and good lateral charge transport simultaneously. Optical simulations of the full perovskite/silicon tandem solar cell stacks are performed to find the optimum recombination and front electrode ITO thicknesses for solar cells as well as modules. Implementation of the optimized 25 nm front electrode ITO thickness in semitransparent single‐junction perovskite solar cells increases the short‐circuit density by 1.5 mA cm −2 compared to the former reference thickness of 75 nm. Combined with an optimized 20 nm recombination ITO layer, high short‐circuit density of 20.3 mA cm −2 is reached in perovskite/silicon tandem solar cell devices, which is the highest reported value for planar front perovskite/silicon tandem solar cells to the best of knowledge. Further interface passivation enables 28.8% power conversion efficiency.

Förderung

  • Fraunhofer-Gesellschaft

Zitieren

APA

Kabaklı, Ö. Ş., McMullin, K., Messmer, C., Bett, A. J., Tutsch, L., Bivour, M., Hermle, M., Glunz, S. W., & Schulze, P. S. (2024). Thickness Optimization of Front and Recombination ITO in Monolithic Perovskite/Silicon Tandem Solar Cells. Solar RRL, 8(20). https://doi.org/10.1002/solr.202400454

Vancouver

Kabaklı ÖŞ, McMullin K, Messmer C, Bett AJ, Tutsch L, Bivour M, et al. Thickness Optimization of Front and Recombination ITO in Monolithic Perovskite/Silicon Tandem Solar Cells. Solar RRL. 2024;8(20). doi:10.1002/solr.202400454

BibTeX
@article{Kabakl2024,
  author = {Kabaklı, Özde Şeyma and McMullin, Kaitlyn and Messmer, Christoph and Bett, Alexander J. and Tutsch, Leonard and Bivour, Martin and Hermle, Martin and Glunz, Stefan W. and Schulze, Patricia S.C.},
  title = {Thickness Optimization of Front and Recombination ITO in Monolithic Perovskite/Silicon Tandem Solar Cells},
  journal = {Solar RRL},
  year = {2024},
  volume = {8},
  number = {20},
  doi = {10.1002/solr.202400454}
}
Kostenlos starten →