Uniform Radial Compression Enabling Densification of High‐Curvature Fiber Electrodes for High‐Rate Ah‐Level Energy Textiles
Small Methods · 10.11.2026
DOI: 10.1002/smtd.71208 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 10.11.2026. Verfasst von Yingfan Chang und 16 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Materials and Devices, Fudan Univ…. Die Arbeit nennt 26 Literaturangaben. Gefördert von: NSFC, MOST, National Natural Science Foundation of China.
Abstract (Originalsprache)
Fiber lithium‐ion batteries (FLIBs), which can be woven into flexible energy textiles, are promising power sources for wearable electronics. However, increasing their cell‐level energy density requires high‐loading fiber electrodes that are limited by the porous, loosely packed structures formed during dip‐coating, since conventional calendering cannot be applied to highly curved fibers without fracturing the coating. Here, we address this limitation by applying uniform radial compression around fiber electrodes through a flexible‐roller calendering approach that uses an elastomer‐wrapped steel roller, enabling efficient densification with substantially reduced structural disruption. X‐ray computed tomography (CT) shows that calendering reduces porosity to 27.36% and removes large voids, along with improved particle packing and coating‐collector contact. These microstructural optimizations effectively enhance transport kinetics, enabling calendered FLIBs to deliver a 72.70% increase in 4C capacity and improved cycling stability (300 cycles with retention over 87.41%). Their strengthened structural integrity affords reliable operation upon repeated deformations like bending and knotting, supports integration into Ah‐level energy textiles, and allows conformal mounting on drone arms for high‐power use. This work presents an effective, damage‐free densification route for high‐curvature fiber electrodes and provides a scalable microstructure‐engineering approach for advancing wearable energy textiles and other deformable energy systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Materials and Devices, Fudan University, Shanghai, China.
- Zhejiang Shenghua Yunfeng Greeneo Co., Ltd., Huzhou, China.
ORCID-Profile: Chen Zhao, Peining Chen, Meng Liao, Huisheng Peng, Bingjie Wang
Förderung
- NSFC
- MOST
- National Natural Science Foundation of China
- Ministry of Science and Technology of the People's Republic of China
Zitieren
APA
Chang, Y., Jiang, H., Zhang, Y., Sun, S., Zhang, K., Cheng, Y., Zhang, R., Li, K., Cao, Y., Fu, Y., Gong, X., Zhao, C., Gui, C., Chen, P., Liao, M., Peng, H., & Wang, B. (2026). Uniform Radial Compression Enabling Densification of High‐Curvature Fiber Electrodes for High‐Rate Ah‐Level Energy Textiles. Small Methods. https://doi.org/10.1002/smtd.71208
Vancouver
Chang Y, Jiang H, Zhang Y, Sun S, Zhang K, Cheng Y, et al. Uniform Radial Compression Enabling Densification of High‐Curvature Fiber Electrodes for High‐Rate Ah‐Level Energy Textiles. Small Methods. 2026. doi:10.1002/smtd.71208
BibTeX
@article{Chang2026,
author = {Chang, Yingfan and Jiang, Haibo and Zhang, Yichi and Sun, Shiqi and Zhang, Kun and Cheng, Yiqing and Zhang, Runze and Li, Kaiyuan and Cao, Yuanhong and Fu, Yanhong and Gong, Xiaocheng and Zhao, Chen and Gui, Chengsheng and Chen, Peining and Liao, Meng and Peng, Huisheng and Wang, Bingjie},
title = {Uniform Radial Compression Enabling Densification of High‐Curvature Fiber Electrodes for High‐Rate Ah‐Level Energy Textiles},
journal = {Small Methods},
year = {2026},
doi = {10.1002/smtd.71208}
}
EUVIMED