A Click‐Derived Pyridine‐Silane Molecular Adhesive for Dual Covalent and Coordination Bonding at Metal‐Polymer Interfaces
Small Methods · 2026-10 · 10 (19)
DOI: 10.1002/smtd.71025 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 07.09.2026. Verfasst von Hyunlee Kim und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of MetaBioHealth, Sungkyunkwan University (SKKU), Suwon, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 89 Literaturangaben. Gefördert von: Ministry of Science and ICT, NRF, Ministry of Science and ICT, South Korea.
Abstract (Originalsprache)
Robust metal‐polymer adhesion is critical for high‐performance interconnects and substrates in next‐generation electronics. Liquid crystal polymers (LCPs) and Cu are increasingly used owing to their thermal stability, chemical resistance, and electrical performance. However, weak interfacial adhesion limits reliable integration, particularly under mechanical or thermal stress. Conventional surface treatments, such as plasma etching and chemical modification, often require complex processing, cause surface damage, and lack scalability. Herein, a bifunctional adhesive with pyridine and silane terminals (PyAAc‐SiOH) is synthesized via Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) to address this challenge. Silanol groups enabled covalent bonding with hydroxylated LCP surfaces, and the pyridine moiety formed coordination bonding with Cu. Interfacial adhesion is evaluated using peel tests (ASTM D3359‐97) and shear tests (ISO 4587), supported by morphological and spectroscopic analyses. At 1 wt% PyAAc‐SiOH, adhesion rating of 5B with 0.77% delamination was achieved, and optimal mechanical performance with lap shear strength of 3.84 MPa, ductility of 0.01, and toughness of 21.23 MJ/m 3 . Fracture surface analysis indicates a concentration‐dependent transition from adhesive to cohesive and mixed failure modes, consistent with monolayer‐like interfacial behavior. Therefore, PyAAc‐SiOH enables efficient, damage‐free enhancement of Cu‐LCP adhesion through molecular‐level control, offering a scalable strategy for flexible substrates, packaging, and heterogeneous electronic integration.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of MetaBioHealth, Sungkyunkwan University (SKKU), Suwon, Republic of Korea.
- School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon, Republic of Korea.
- School of Chemical Engineering, Sungkyunkwan University (SKKU), Suwon, Republic of Korea.
- Research Center for Advanced Materials Technology, Sungkyunkwan University (SKKU), Suwon, Republic of Korea.
- Biomedical Institute for Convergence at SKKU (BICS), Sungkyunkwan University (SKKU), Suwon, Republic of Korea.
ORCID-Profile: Do Hyeon Jung, Yun Ah Kim, Hui Hun Cho, Jun Hyuk Heo, Sung Min Cho, Byungkwon Lim, Jung Heon Lee
Förderung
- Ministry of Science and ICT
- NRF
- Ministry of Science and ICT, South Korea
- National Research Foundation of Korea
Zitieren
APA
Kim, H., Jung, D. H., Cho, Y., Jang, S. K., Kim, Y. A., Cho, H. H., Heo, J. H., Cho, S. M., Lim, B., & Lee, J. H. (2026). A Click‐Derived Pyridine‐Silane Molecular Adhesive for Dual Covalent and Coordination Bonding at Metal‐Polymer Interfaces. Small Methods, 10(19). https://doi.org/10.1002/smtd.71025
Vancouver
Kim H, Jung DH, Cho Y, Jang SK, Kim YA, Cho HH, et al. A Click‐Derived Pyridine‐Silane Molecular Adhesive for Dual Covalent and Coordination Bonding at Metal‐Polymer Interfaces. Small Methods. 2026;10(19). doi:10.1002/smtd.71025
BibTeX
@article{Kim2026,
author = {Kim, Hyunlee and Jung, Do Hyeon and Cho, Yejin and Jang, Sung Kyu and Kim, Yun Ah and Cho, Hui Hun and Heo, Jun Hyuk and Cho, Sung Min and Lim, Byungkwon and Lee, Jung Heon},
title = {A Click‐Derived Pyridine‐Silane Molecular Adhesive for Dual Covalent and Coordination Bonding at Metal‐Polymer Interfaces},
journal = {Small Methods},
year = {2026},
volume = {10},
number = {19},
doi = {10.1002/smtd.71025}
}
EUVIMED