Hydrothermal‐Assisted In Situ Intercalation Synthesis of Ti 3 C 2 T x MXene in 6 Hours
Small Methods · 2026-08 · 10 (16)
DOI: 10.1002/smtd.70871 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 28.07.2026. Verfasst von Muhammad Imran Rameel und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Kaunas University of Technology, Kaunas, Lithuania. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education Youth and Sports, EFRR, Czech Science Foundation.
Abstract (Originalsprache)
Despite the rapid expansion of MXene research, scalable and time‐efficient synthesis routes that simultaneously deliver high‐quality, high‐yield products remain limited. Here, we present a facile, high‐yield method for the synthesis, in situ intercalation, and delamination of Ti 3 C 2 T x MXene. In situ intercalation during hydrothermal‐assisted etching facilitates aluminum removal and promotes the delamination of MXene sheets. This approach reduces synthesis time to 6 h at 90°C, compared to up to 48 h in conventional protocols. The methodology employs a mild etchant system of hydrochloric acid and lithium fluoride, with lithium chloride as an in situ intercalant within a closed hydrothermal autoclave. Hydrothermal conditions enhance etchant reactivity and kinetics, while Li + ions weaken van der Waals forces, enabling exfoliation into two‐dimensional MXenes. Comprehensive characterization confirms the method's high efficacy, yielding 74.2% ± 3.7% delaminated nanosheets with a monolayer thickness of 1–1.5 nm. X‐ray diffraction confirms successful Al etching and effective delamination. X‐ray photoelectron and energy‐dispersive spectroscopies show surface terminations consisting of –Cl, –F, and –O. The resulting MXene exhibits an electrical conductivity of 7 500 S cm − 1 . This methodology offers a scalable, single‐step route to MXene synthesis, marking a significant advance and opening avenues for commercial applications of these materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Kaunas University of Technology, Kaunas, Lithuania.
- Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Prague, Czech Republic.
ORCID-Profile: Filipa M Oliveira, Bing Wu, Zdeněk Sofer, Daiva Zeleniakiene
Förderung
- Ministry of Education Youth and Sports
- EFRR
- Czech Science Foundation
- European Commission
- Grantová Agentura České Republiky
Zitieren
APA
Rameel, M. I., Monastyreckis, G., Oliveira, F. M., Wu, B., Šturala, J., Mazánek, V., Sofer, Z., & Zeleniakiene, D. (2026). Hydrothermal‐Assisted In Situ Intercalation Synthesis of Ti 3 C 2 T x MXene in 6 Hours. Small Methods, 10(16). https://doi.org/10.1002/smtd.70871
Vancouver
Rameel MI, Monastyreckis G, Oliveira FM, Wu B, Šturala J, Mazánek V, et al. Hydrothermal‐Assisted In Situ Intercalation Synthesis of Ti 3 C 2 T x MXene in 6 Hours. Small Methods. 2026;10(16). doi:10.1002/smtd.70871
BibTeX
@article{Rameel2026,
author = {Rameel, Muhammad Imran and Monastyreckis, Gediminas and Oliveira, Filipa M and Wu, Bing and Šturala, Jiří and Mazánek, Vlastimil and Sofer, Zdeněk and Zeleniakiene, Daiva},
title = {Hydrothermal‐Assisted In Situ Intercalation Synthesis of Ti 3 C 2 T x MXene in 6 Hours},
journal = {Small Methods},
year = {2026},
volume = {10},
number = {16},
doi = {10.1002/smtd.70871}
}
EUVIMED