Dielectric‐Chemical Interfacial Engineering Toward Improved Efficiency and Reverse‐Bias Stability for Air‐Processed Perovskite Photovoltaics
Small Methods · 2026-08 · 10 (15)
DOI: 10.1002/smtd.70827 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 06.07.2026. Verfasst von Zhenkun Zhu und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits, Wuhan University, Wuhan, P. R. China. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Science and Technology Program of Hubei Province, National Key R&D Program of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
The performance of air‐processed perovskite solar cells (PSCs) is often compromised by the vulnerable perovskite/charge transport layer interface arising from exposure to ambient moisture during fabrication, which promotes nonradiative recombination, ion migration, and poor tolerance to reverse‐bias stress. Conventional passivation strategies primarily focus on defect‐density reduction and fail to address these issues simultaneously. Here, we report a dielectric‐chemical interfacial engineering based on solution‐processed metal oxide nanoparticles deposited at the perovskite/hole transport layer (HTL) interface. On one hand, the Pb‐O coordination between the metal oxide and the perovskite surface chemically passivates Pb‐related defects. On the other hand, the resulting high‐κ dielectric environment screens residual charged defects and increases interfacial capacitance, thereby suppressing recombination, mitigating electric‐field localization under reverse bias, and restraining ion migration. Among the investigated metal oxides, ZrO 2 provides the most effective interfacial passivation and dielectric screening, leading to notable efficiencies of 25.60% and 22.85% for the PSCs and perovskite solar modules (PSMs), respectively. Moreover, the resulting devices exhibit excellent operational robustness, as evidenced by the increased reverse breakdown voltage from −1.8 V to −4.0 V and the retention of 96.8% of the initial efficiency after 1470 h of maximum power point tracking (MPPT) with encapsulation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Integrated Circuits, Wuhan University, Wuhan, P. R. China.
- School of Electronics and Electrical Engineering, Wuhan Textile University, Wuhan, P. R. China.
- Postdoctoral Innovation Practice Base, Shenzhen Polytechnic, Hoffmann Institute of Advanced Materials, Shenzhen, P. R. China.
- National Engineering Research Center of Fiber Optic Sensing Technology and Networks, Wuhan University of Technology, Wuhan, P. R. China.
- Hubei Optical Fundamental Research Center, Wuhan, P. R. China.
ORCID-Profile: Tonghui Guo, Ning Wang, Qidong Tai
Förderung
- Science and Technology Program of Hubei Province
- National Key R&D Program of China
- National Key Research and Development Program of China
Zitieren
APA
Zhu, Z., Guo, T., Liu, W., Jin, J., Wang, N., Li, L., Zhang, Y., Ke, Z., Yang, T., Wei, Z., & Tai, Q. (2026). Dielectric‐Chemical Interfacial Engineering Toward Improved Efficiency and Reverse‐Bias Stability for Air‐Processed Perovskite Photovoltaics. Small Methods, 10(15). https://doi.org/10.1002/smtd.70827
Vancouver
Zhu Z, Guo T, Liu W, Jin J, Wang N, Li L, et al. Dielectric‐Chemical Interfacial Engineering Toward Improved Efficiency and Reverse‐Bias Stability for Air‐Processed Perovskite Photovoltaics. Small Methods. 2026;10(15). doi:10.1002/smtd.70827
BibTeX
@article{Zhu2026,
author = {Zhu, Zhenkun and Guo, Tonghui and Liu, Wei and Jin, Junjun and Wang, Ning and Li, Lin and Zhang, Yuchen and Ke, Zhengyang and Yang, Tianyu and Wei, Zhe and Tai, Qidong},
title = {Dielectric‐Chemical Interfacial Engineering Toward Improved Efficiency and Reverse‐Bias Stability for Air‐Processed Perovskite Photovoltaics},
journal = {Small Methods},
year = {2026},
volume = {10},
number = {15},
doi = {10.1002/smtd.70827}
}
EUVIMED