Stabilized O3‐Type Layered Oxide Cathode via High‐Entropy Engineering
Small Methods · 2026-06 · 10 (11)
DOI: 10.1002/smtd.70695 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 11.05.2026. Verfasst von Huachao Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Clean Energy Utilization, College of Energy Engineering, Zhejiang University, Hangzhou, Zhejiang, China. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
O3‐type layered transition metal oxides are promising cathodes for sodium‐ion batteries due to their high initial sodium content and theoretical capacity. However, they suffer from irreversible phase transitions, sluggish Na + diffusion, and lattice strain during cycling, leading to rapid capacity fading and poor rate performance. Herein, we report a high‐entropy O3‐type layered oxide cathode, NaNi 0.24 Fe 0.24 Mn 0.24 Li 0.07 Mg 0.07 Ti 0.07 Sb 0.07 O 2 (HEO), designed by incorporating near‐equiatomic redox‐active Ni/Fe/Mn with low‐content inactive Li/Mg/Ti/Sb dopants to maximize configurational entropy while maintaining charge neutrality and ionic radius matching. Compared to the benchmark NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM), HEO exhibits single‐phase formation, expanded interlayer spacing, narrowed bandgap (from 1.35 to 0.63 eV), and reduced Na + migration barriers. This enables superior rate capability (63.57 mAh g −1 at 10 C with 49.0% retention) and exceptional cycling stability (80.71% retention after 300 cycles at 1 C; 80.09% after 1000 cycles at 5 C). In situ XRD reveals a highly reversible O3 ↔ P3 ↔ OP2 phase transition sequence, suppressing the irreversible O’3 phase in NFM. These improvements stem from entropy stabilization and synergistic multi‐cation effects, demonstrating high‐entropy engineering as an effective strategy for developing robust, long‐lifespan sodium‐ion battery cathodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Clean Energy Utilization, College of Energy Engineering, Zhejiang University, Hangzhou, Zhejiang, China.
ORCID-Profile: Huachao Yang
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Yang, H., Li, Y., Jiang, S., Bo, Z., & Xu, Y. (2026). Stabilized O3‐Type Layered Oxide Cathode via High‐Entropy Engineering. Small Methods, 10(11). https://doi.org/10.1002/smtd.70695
Vancouver
Yang H, Li Y, Jiang S, Bo Z, Xu Y. Stabilized O3‐Type Layered Oxide Cathode via High‐Entropy Engineering. Small Methods. 2026;10(11). doi:10.1002/smtd.70695
BibTeX
@article{Yang2026,
author = {Yang, Huachao and Li, Yuhang and Jiang, Shibo and Bo, Zheng and Xu, Yunkai},
title = {Stabilized O3‐Type Layered Oxide Cathode via High‐Entropy Engineering},
journal = {Small Methods},
year = {2026},
volume = {10},
number = {11},
doi = {10.1002/smtd.70695}
}
EUVIMED