EUVIMEDEUVIMED entdecken
Crossref

Implantable CB/PVDF/TPU Sensors for In Situ Monitoring of Internal Temperature Changes in Lithium‐Ion Batteries

Guo Chen iD, Zijun Huang, Xianjie Xu, Jiaxin Sun, Zhefu Mu, Sheng Huang iD, Xiuquan Gu iD

Small Methods · 2026-03 · 10 (5)

DOI: 10.1002/smtd.202501662 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 18.02.2026. Verfasst von Guo Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Physics, China University of Mining and Technology, Xuzhou, Jiangsu, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Macao Young Scholars Program, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In situ monitoring of lithium‐ion battery thermal runaway is limited by the invasiveness and insufficient sensitivity of conventional thermometry. There is an urgent demand for non‐destructive, highly responsive, and stable sensing paradigms. Herein, we report an embeddable temperature sensor based on a 37 µm‐thick ternary composite film of carbon black (CB), poly(vinylidene fluoride) (PVDF), and thermoplastic polyurethane (TPU). By tailoring the CB mass fraction, constructing a dynamic TPU cross‐link network, and adopting an ultra‐thin architecture, the film simultaneously maximizes thermal responsivity and electrochemical compatibility. Interfacial nucleation induced by CB nanospheres increases the β‐phase content of PVDF, evidenced by fourier transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD) Battery Management System. The sensor achieves a response value of 0.7 under a 10°C temperature difference and maintains stable performance over 10 cycles. Integrated into a battery, it shows a resistance response of 0.56 for a 10°C change without affecting normal charge‐discharge cycles, and only a 16.7% increase in charge transfer resistance after 50 cycles, with capacity decay similar to the control group. By incorporating graph neural networks (GNNs), this study enables accurate internal temperature recognition and develops an early warning model for thermal runaway. The model achieves over 92% classification accuracy (AUC > 0.95) between 10°C and 40°C, supporting the development of high‐safety, intelligent battery management systems.

Schlagwörter

Stichwörter der Autor:innen

PVDFinternal temperaturelithium batteriessafety monitoringthermal runaway

Autor:innen und Institutionen

  • School of Materials Science and Physics, China University of Mining and Technology, Xuzhou, Jiangsu, China.

ORCID-Profile: Guo Chen, Sheng Huang, Xiuquan Gu

Förderung

  • National Natural Science Foundation of China
  • Macao Young Scholars Program
  • National Key Research and Development Program of China
  • China University of Mining and Technology (CUMT) Experimental Technology Research and Development Projects

Zitieren

APA

Chen, G., Huang, Z., Xu, X., Sun, J., Mu, Z., Huang, S., & Gu, X. (2026). Implantable CB/PVDF/TPU Sensors for In Situ Monitoring of Internal Temperature Changes in Lithium‐Ion Batteries. Small Methods, 10(5). https://doi.org/10.1002/smtd.202501662

Vancouver

Chen G, Huang Z, Xu X, Sun J, Mu Z, Huang S, et al. Implantable CB/PVDF/TPU Sensors for In Situ Monitoring of Internal Temperature Changes in Lithium‐Ion Batteries. Small Methods. 2026;10(5). doi:10.1002/smtd.202501662

BibTeX
@article{Chen2026,
  author = {Chen, Guo and Huang, Zijun and Xu, Xianjie and Sun, Jiaxin and Mu, Zhefu and Huang, Sheng and Gu, Xiuquan},
  title = {Implantable CB/PVDF/TPU Sensors for In Situ Monitoring of Internal Temperature Changes in Lithium‐Ion Batteries},
  journal = {Small Methods},
  year = {2026},
  volume = {10},
  number = {5},
  doi = {10.1002/smtd.202501662}
}
Kostenlos starten →