EUVIMEDEUVIMED entdecken
Crossref

Nanoscopic Parylene Layer: Enhancing Perovskite Solar Cells Through Parylene‐D Passivation

Heesu Kim, Byeongil Noh, Cheong Beom Lee, Eun Young Park, Gunoh Lee, Hyuntae Choi, Yeji Kim, Kyeounghak Kim, Nam Joong Jeon, Kyung Jin Lee, Seulki Song iD

Small Methods · 2026-01 · 10 (2)

DOI: 10.1002/smtd.202500395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 19.05.2025. Verfasst von Heesu Kim und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering and Applied Chemistry, Chungnam National University, Daejeon, 34134, Republic of Korea. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 76 Literaturangaben. Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of eco‐friendly energy sources has advanced photovoltaic technologies, with perovskite solar cells (PSCs) emerging as promising alternatives owing to their high efficiency, low fabrication costs, and excellent optical and electronic properties. However, their commercialization is hindered by stability issues, such as ion migration, defect‐induced degradation, and nonuniformity of the solution process over large areas, particularly at the perovskite/hole‐transporting layer (HTL) interface. To address these challenges, chemical vapor deposition (CVD) is employed to introduce an ultrathin, uniform parylene‐D layer at the perovskite/HTL interface. Parylene‐D, containing additional chlorine functional groups compared to parylene‐C, supports bidentate chelation, enabling effective interaction with uncoordinated Pb 2 ⁺ and perovskite surface defects. This passivation layer significantly reduces nonradiative recombination and suppresses ion migration without affecting the morphology or electrical properties of large‐area perovskites. The optimized parylene‐D treatment yields PSCs with 23.75% efficiency and enhanced open‐circuit voltage and fill factor. Stability tests demonstrate that the parylene‐D‐treated devices retain their initial efficiency after 1500 h under 10% relative humidity at room temperature and maintain 80% efficiency after 1200 h at 65 °C in a nitrogen environment. Furthermore, the scalability of this approach is validated by fabricating a large‐area module (25 cm 2 aperture area), achieving module and active area efficiencies of 19.44% and 20.59%, respectively. These results highlight the potential of parylene‐D passivation via CVD as a practical and scalable strategy to enhance PSC performance and stability.

Schlagwörter

Stichwörter der Autor:innen

chemical vapor depositionparylenepassivationperovskite solar cells

Autor:innen und Institutionen

  • Department of Chemical Engineering and Applied Chemistry, Chungnam National University, Daejeon, 34134, Republic of Korea.
  • Department of Chemical Engineering, Hanyang University, Seoul, 04763, Republic of Korea.
  • Division of Advanced Materials, Korea Research Institute of Chemical Technology (KRICT), Daejeon, 34114, Republic of Korea.

ORCID-Profile: Seulki Song

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Kim, H., Noh, B., Lee, C. B., Park, E. Y., Lee, G., Choi, H., Kim, Y., Kim, K., Jeon, N. J., Lee, K. J., & Song, S. (2026). Nanoscopic Parylene Layer: Enhancing Perovskite Solar Cells Through Parylene‐D Passivation. Small Methods, 10(2). https://doi.org/10.1002/smtd.202500395

Vancouver

Kim H, Noh B, Lee CB, Park EY, Lee G, Choi H, et al. Nanoscopic Parylene Layer: Enhancing Perovskite Solar Cells Through Parylene‐D Passivation. Small Methods. 2026;10(2). doi:10.1002/smtd.202500395

BibTeX
@article{Kim2026,
  author = {Kim, Heesu and Noh, Byeongil and Lee, Cheong Beom and Park, Eun Young and Lee, Gunoh and Choi, Hyuntae and Kim, Yeji and Kim, Kyeounghak and Jeon, Nam Joong and Lee, Kyung Jin and Song, Seulki},
  title = {Nanoscopic Parylene Layer: Enhancing Perovskite Solar Cells Through Parylene‐D Passivation},
  journal = {Small Methods},
  year = {2026},
  volume = {10},
  number = {2},
  doi = {10.1002/smtd.202500395}
}
Kostenlos starten →