EUVIMEDEUVIMED entdecken
Crossref

High‐Resolution 3D Printing of Stretchable Granular Hydrogel Filaments for Fabricating Robust and Durable Tissue Phantoms with Tunable Mechanical Strength

Yifu Chu iD, Xiaoyi Lan iD, Peineng Zhu, Tao Zhang, Zhiyao Ma, Adetola Adesida, Hongbo Zeng iD, Lingyun Chen iD

Small Methods · 2025

DOI: 10.1002/smtd.202402103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, 2025. Verfasst von Yifu Chu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Agricultural, Life, and Environmental Science, University of Alberta, Edmonton, Alberta, T6G 2P5, Canada. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Hydrogels, Phantoms, Imaging. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canada Research Chairs.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Granular hydrogels are a promising class of 3D‐printable inks but often suffer from low printing resolution due to large microgel sizes (>100 µm) and weak mechanical performance from lower packing density. To overcome these limitations, a novel whey protein microgels‐based granular hydrogel (WMGH) is developed, consisting of uniform, size‐controllable microgels (1, 6, and 20 µm) via protein‐polysaccharide segregative phase separation. The smaller microgels enable WMGH to stretch like continuous liquid inks by adjusting printing speed and pressure, achieving high‐resolution 3D‐printing (200 µm) with minimal ink spreading (≈5%) using a 25G nozzle (260 µm). This allows the fabrication of intricate structures like human ear and aortic valve models. Incorporating a polyacrylamide (PAM) second percolating network transforms WMGH inks into double‐network hydrogels (DN‐WMGH), showing up to 36 fold increase in toughness (1.45 MJ m − 3 ) compared to PAM hydrogels. Controlling microgel size provides a new approach for tailoring mechanical strength (6–300 kPa) while maintaining durability, exhibiting full recovery after 100 tensile cycles at 100% strain. DN‐WMGH from biopolymers demonstrated good compatibility. This high‐resolution 3D‐printing of robust DN‐WMGH replicates the mechanical properties of various tissues, from brain (

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalHydrogelsPhantoms, ImagingHumansMicrogelsAcrylic ResinsWhey ProteinsTissue EngineeringPolyacrylamides

Stichwörter der Autor:innen

3d printingbiopolymer microgelsdouble networksembedded 3d printinggranular hydrogelsorgan phantomstunable mechanical strength

Substanzen

HydrogelsMicrogelsAcrylic ResinsWhey ProteinsPolyacrylamides

Autor:innen und Institutionen

  • Faculty of Agricultural, Life, and Environmental Science, University of Alberta, Edmonton, Alberta, T6G 2P5, Canada.
  • Faculty of Medicine and Dentistry, University of Alberta, Edmonton, Alberta, T6G 2R3, Canada.
  • Faculty of Engineering, University of Alberta, Edmonton, Alberta, T6G 1H9, Canada.

ORCID-Profile: Yifu Chu, Xiaoyi Lan, Hongbo Zeng, Lingyun Chen

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Canada Research Chairs

Zitieren

APA

Chu, Y., Lan, X., Zhu, P., Zhang, T., Ma, Z., Adesida, A., Zeng, H., & Chen, L. (2025). High‐Resolution 3D Printing of Stretchable Granular Hydrogel Filaments for Fabricating Robust and Durable Tissue Phantoms with Tunable Mechanical Strength. Small Methods. https://doi.org/10.1002/smtd.202402103

Vancouver

Chu Y, Lan X, Zhu P, Zhang T, Ma Z, Adesida A, et al. High‐Resolution 3D Printing of Stretchable Granular Hydrogel Filaments for Fabricating Robust and Durable Tissue Phantoms with Tunable Mechanical Strength. Small Methods. 2025. doi:10.1002/smtd.202402103

BibTeX
@article{Chu2025,
  author = {Chu, Yifu and Lan, Xiaoyi and Zhu, Peineng and Zhang, Tao and Ma, Zhiyao and Adesida, Adetola and Zeng, Hongbo and Chen, Lingyun},
  title = {High‐Resolution 3D Printing of Stretchable Granular Hydrogel Filaments for Fabricating Robust and Durable Tissue Phantoms with Tunable Mechanical Strength},
  journal = {Small Methods},
  year = {2025},
  doi = {10.1002/smtd.202402103}
}
Kostenlos starten →