EUVIMEDEUVIMED entdecken
Übersichtsarbeit

Ionic Liquid Top Surface Engineering: In Situ GIWAXS Insights Into 1D/3D Heterojunction Perovskite Formation

Taomiao Wang, Fei Wang, Yonggui Sun, Jing Ma, Xiao Liang, Xianfang Zhou, Xiaokang Sun, Qiannan Li, Yongjun Li, Dawei Duan, Quanyao Zhu, Chunming Yang und 2 weitere

Small Methods · 2025-08 · 9 (8)

DOI: 10.1002/smtd.202401852 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Small Methods, online erschienen am 29.12.2024. Verfasst von Taomiao Wang und 13 weiteren Autor:innen. Beteiligte Einrichtung: Hoffmann Institute of Advanced Materials, Shenzhen Polytechnic University, 7098 Liuxian Boulevard, Shenzhen, 518055, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: Scientific Research Startup Fund for Spray-on Perovskite Photovoltaics R&D Center, Guangdong Basic and Applied Basic Research Foundation, Shenzhen Science and Technology Innovation Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low‐dimensional perovskites have been demonstrated repeatedly to improve the performance of perovskite photovoltaic devices in both light‐to‐electricity conversion efficiency and device durability. In this work, the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium hydrogen sulfate (EMIMHSO 4 ) is innovatively introduced as a capping layer, which interacts with the residual PbI 2 on the 3D perovskite top surface to generate the 1D perovskite, EMIMPbI 3 . By adjusting the concentration of the IL, 1D perovskite formations with distinct morphologies is achieved. Time‐resolved GIWAXS studies allows to track the formation process of 1D perovskite on the 3D perovskite top surface. Moreover, GIWAXS at varying angles provide insights into the IL's role in the management of PbI 2 distribution. Further analyses, including in situ PL and ICP‐MS, demonstrates that the 1D perovskite layer effectively enhances the stability of the final 3D perovskite. This stabilization, combines with defect passivation of the 1D perovskite and its effective management of residual PbI 2 , enables the 1D/3D device to achieve a PCE of 25.01%, a marked improvement over the pristine 3D device. Additionally, the 1D/3D device displays superior long‐term durability, retaining 94% of its initial PCE after 2000 h in a nitrogen atmosphere, while the 3D device maintains only 66% of its initial PCE.

Schlagwörter

Stichwörter der Autor:innen

1D perovskitein situ GIWAXSionic liquidperovskite solar cells

Autor:innen und Institutionen

  • Hoffmann Institute of Advanced Materials, Shenzhen Polytechnic University, 7098 Liuxian Boulevard, Shenzhen, 518055, China.
  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, 430070, China.
  • Medical Intelligence and Innovation Academy, Southern University of Science and Technology Hospital, Shenzhen, 518055, China.
  • Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, 201204, China.
  • Department of Electronic and Information Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong SAR, 999077, Hong Kong.

ORCID-Profile: Gang Li

Förderung

  • Scientific Research Startup Fund for Spray-on Perovskite Photovoltaics R&D Center
  • Guangdong Basic and Applied Basic Research Foundation
  • Shenzhen Science and Technology Innovation Program
  • Research Grants Council of Hong Kong
  • Research Projects of Department of Education of Guangdong Province
  • RGC Senior Research Fellowship Scheme

Zitieren

APA

Wang, T., Wang, F., Sun, Y., Ma, J., Liang, X., Zhou, X., Sun, X., Li, Q., Li, Y., Duan, D., Zhu, Q., Yang, C., Li, G., & Hu, H. (2025). Ionic Liquid Top Surface Engineering: In Situ GIWAXS Insights Into 1D/3D Heterojunction Perovskite Formation. Small Methods, 9(8). https://doi.org/10.1002/smtd.202401852

Vancouver

Wang T, Wang F, Sun Y, Ma J, Liang X, Zhou X, et al. Ionic Liquid Top Surface Engineering: In Situ GIWAXS Insights Into 1D/3D Heterojunction Perovskite Formation. Small Methods. 2025;9(8). doi:10.1002/smtd.202401852

BibTeX
@article{Wang2025,
  author = {Wang, Taomiao and Wang, Fei and Sun, Yonggui and Ma, Jing and Liang, Xiao and Zhou, Xianfang and Sun, Xiaokang and Li, Qiannan and Li, Yongjun and Duan, Dawei and Zhu, Quanyao and Yang, Chunming and Li, Gang and Hu, Hanlin},
  title = {Ionic Liquid Top Surface Engineering: In Situ GIWAXS Insights Into 1D/3D Heterojunction Perovskite Formation},
  journal = {Small Methods},
  year = {2025},
  volume = {9},
  number = {8},
  doi = {10.1002/smtd.202401852}
}
Kostenlos starten →